{"product_id":"studio-technologies-model-5204-dual-line-input-to-dante-interface","title":"Studio Technologies Model 5204 Dual Line Input to Dante Interface","description":"\u003cp\u003eThe \u003cstrong\u003eStudio Technologies Model 5204\u003c\/strong\u003e is perfect for use in conjunction with a variety of fixed and portable audio equipment that offer analog output signals. An obvious application is with legacy equipment that only offers analog outputs. A few simple connections are all that's required to covert those signals into the world of audio-over-Ethernet. When deploying, maintaining, or modifying Dante networks the unit can be a useful test tool, offering a simple, high-quality means of creating a 2-channel signal source. For permanent applications there's no reason why a Model 5204 can't reside within an equipment rack or be mounted, using optional brackets, underneath a table or on-air studio set. In a conference room setting the unit can be permanently connected to a PoE-enabled Ethernet port, ready to accept a signal source from various user-provided devices.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eLine Input A\u003c\/h3\u003e\r\n\u003cp\u003eUsing a 3-conductor (\"stereo\") 3.5 mm jack, it's a simple matter to connect unbalanced sources to the Model 5204's line input A. These signals would typically be provided by personal computers, smartphones, or personal audio devices which have average (nominal) levels in the range of –20 to –10 dBu. One rotary control is used to adjust the input level, making it a simple task to optimize the conversion of the input analog audio source to the Dante output. The level knob is a push-in\/push-out type which helps prevent inadvertent adjustment.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eLine Input B\u003c\/h3\u003e\r\n\u003cp\u003eThe Model 5204's line input B is designed for use with professional line-level analog audio signals. The 2-channel input is electronically balanced, capacitor-coupled, and uses two standard 3-pin female XLR connectors. A single rotary level control allows the input sensitivity of both channels to be adjusted. Using the push-in\/push-out knob it's a simple matter to adjust the input circuitry to match average (nominal) signal levels which would typically be in the range of 0 to +4 dBu. And with a maximum input level of +24 dBu there will always be sufficient headroom for \"pro\" audio performance. Protection components in the input circuitry help ensure reliability in tough field applications.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eSumming (Mixing) of the Input Signals\u003c\/h3\u003e\r\n\u003cp\u003eThe two channels associated with line input A and the two channels associated with line input B are mixed (summed), sent to analog-to-digital conversion circuitry, and then transmitted over the Dante network. The two signals associated with the channel 1 (or \"left\") inputs are combined and sent out Dante channel 1. The two signals associated with the channel 2 (or \"right\") inputs are combined and sent out Dante channel 2. (There is no provision for creating a monaural signal which is typically not an issue as other connected Dante-enabled equipment can usually perform such tasks.)\u003c\/p\u003e\r\n\u003ch3 id=\"toc_3\"\u003eMetering\u003c\/h3\u003e\r\n\u003cp\u003eTwo 7-step LED meters provide a real-time level indication of the two audio output channels. Scaled in dBFS (decibels referenced to full scale digital) the meters offer a direct view of the signal levels as they are transported in the digital domain via Dante. Optimal audio performance requires transporting signals at their proper levels — without an accurate indication this can be difficult to achieve.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_4\"\u003eEthernet Data and PoE\u003c\/h3\u003e\r\n\u003cp\u003eThe Model 5204 connects to a data network using a standard 100 Mb\/s twisted-pair Ethernet interface. The physical interconnection is made by way of a Neutrik etherCON RJ45 connector. While compatible with standard RJ45 plugs, etherCON allows a ruggedized and locking interconnection for harsh or high-reliability environments. An LED displays the status of the network connection.\u003c\/p\u003e\r\n\u003cp\u003eThe Model 5204's operating power is provided by way of the Ethernet interface using the Power-over-Ethernet (PoE) standard. This allows fast and efficient interconnection with the associated data network. To support PoE power management, the Model 5204's PoE interface reports to the power sourcing equipment (PSE) that it's a class 3 (mid power) device. An LED is provided to indicate when power is being supplied to the Model 5204. Note that no provision has been made to allow an external power source to be connected. However, if the associated Ethernet switch does not provide PoE capability a commonly-available mid-span PoE power injector can be utilized.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_5\"\u003eDedicated Charging Port (DCP)\u003c\/h3\u003e\r\n\u003cp\u003eA unique resource is the Model 5204's dedicated charging port. Using a standard USB type A receptacle, the port has a 5 volt output with a maximum current of approximately 1 amp. This nominally 5 watt output should be sufficient to rapidly charge a personal audio player, smartphone, or tablet device. An auto-detect feature supports divider mode, short mode, and 1.2 V\/1.2 V charging modes. Besides charging, the port can allow a connected device to continuously send audio to the associated Dante network without requiring an external power source. Note that in this situation interfacing a device with the Model 5204 requires separate cables, one for the analog audio source and one for powering\/charging.\u003c\/p\u003e\r\n\u003cp\u003eOne note of interest: the dedicated charging port derives its power from the Ethernet with Power-over-Ethernet (PoE) connection. While the Model 5204's audio and data circuitry takes very little energy, the dedicated charging port can source up to approximately 5 watts. As such, the Model 5204's Ethernet interface will identify itself to upstream power-sourcing-equipment (PSE), typically an Ethernet switch with integrated PoE, as a PoE class 3 powered device (PD).\u003c\/p\u003e\r\n\u003ch3 id=\"toc_6\"\u003eDante Audio-over-Ethernet\u003c\/h3\u003e\r\n\u003cp\u003eAudio data is sent from the Model 5204 using the Dante audio-over-Ethernet media networking technology. As a Dante-compliant device, the Model 5204's two audio channels can be assigned to other devices using the Dante Controller software application. Bit depths of up to 24 and sample rates of 44.1, 48, 88.2, and 96 kHz are supported. Two bi-color LEDs provide an indication of the Dante connection status. The Model 5204 uses Audinate's Ultimo integrated circuit for implementing Dante. The integrated circuit's firmware can be updated via the Ethernet connection, helping to ensure that its capabilities remain up to date.\u003c\/p\u003e","brand":"Studio Technologies","offers":[{"title":"Default Title","offer_id":44450610249831,"sku":"139795","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/studio-technologies-model-5204_139795_1_0d0069c8-6a8f-49dd-89d7-5c1c17fd6cbd.jpg?v=1787093751","url":"https:\/\/vintageking.mom\/products\/studio-technologies-model-5204-dual-line-input-to-dante-interface","provider":"Vintage King","version":"1.0","type":"link"}