Experts At Your Service
Have a question? Our Audio Consultants and Technicians have years of real-world experience and are ready to help.
Product Description
The Red Panda Remote 4 is a Tensor remote switch with 4 modes to access presets and pedal functions. Scribble strips above each switch can be labeled with a Sharpie and erased using isopropyl alcohol. It connects to the Tensor via a 1/4" TRS cable (included). The Tensor firmware needs to be version 1.1 or later. The Remote 4 does not require power.
Configuring the Remote Switch:
- Start with the pedal powered on and nothing plugged into the CTRL port.
- Hold the right footswitch while plugging in the remote switch. The right LED will blink yellow 3 times to indicate it is in CTRL configuration mode. You can release the right footswitch and begin configuration immediately.
- Press one of the buttons on the remote switch to select a mode.
- Hold the right footswitch for 2 seconds to save the configuration. The right LED will blink green to indicate that the configuration has been saved.