Experts At Your Service
Have a question? Our Audio Consultants and Technicians have years of real-world experience and are ready to help.
Product Description
The RCA 77-D is a classic ribbon microphone; great on horns, guitars, and vocals. Rich lows, silky smooth mids and highs. It was used in countless radio and TV studios in the 50s and 60s. A must have for every mic locker - from RCA, the inventors of the ribbon mic.
History
A ribbon mic works by suspending a thin piece of corrugated aluminum, (the 'ribbon'), between two poles of an Alnico magnet. The compression and rarefaction of air vibrates this ribbon in the magnetic field, which creates voltage changes that are run through an output transformer to the external amplifier of your choice. Like a dynamic mic, a ribbon requires no tubes, batteries or power supply of any kind. In the case of the RCA 77-D, the chassis is built to absorb mechanical shocks, the output transformer is shielded against magnetic fields, and the capsule is resistant to changes in humidity and temperature.
The 77-D is a high-fidelity ribbon (or "velocity") type mic that was originally designed for both television and broadcast studio use. Two different finishes were offered: umber grey for TV (since it was non-reflective), and a satin chrome version for radio broadcast.
The 77-D was released in 1945 and discontinued in 1955, when its successor the 77-DX was released. The 77-D was advertised as a ‘polydirectional’ mic; what we call today a multi-pattern microphone. The various polar patterns were created by using a tube connected to a chamber behind the ribbon. By rotating a shutter to close off portions of this chamber, patterns could be created from N for non-directional (chamber fully closed), U for unidirectional, to B for bi-directional aka figure-eight (chamber fully open). At a specific point on this continuum, a cardioid pattern is created.
The 77-D has a frequency response from 40 Hz to 20 kHz. It is also possible to attenuate the low-frequencies with a screwdriver-operated switch on the bottom of the mic body, marked M (for music), V1, and V2 (for voice). The output impedance can be set to 30, 150 or 250 ohms.
The RCA 77 series resembles a large pill of the capsule variety, and has become THE iconic shape of a microphone.