Radial Engineering StageBug SB-6 Passive Stereo Line Isolator

Product Description

The Radial Engineering StageBug SB-6 Passive Stereo Line Isolator is a two-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and effectively eliminate noise when used with instruments, consumer electronics, or professional line-level devices.

PROBLEM SOLVER FOR STEREO SYSTEMS

The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20 Hz to 20 kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15 dB pad allows you to handle high volume outputs without distortion. When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly.

APPLICATIONS

USING THE SB-6 IN A STEREO SETUP

Isolate the output from a DJ Mixer to a power amp using the SB-6 to eliminate hum and buzz caused by ground loops. Either ¼" mono or TRS connectors may be used.

USING THE SB-6 IN A PRO SETUP

When running multiple speakers, you can often encounter noise due to imperfect power systems and DC offsets. Use the SB-6 to isolate distant loudspeakers to solve the problem.

USING THE SB-6 IN A GUITAR RIG

Eliminate noise in your guitar setup by isolating the guitar amp from other electronic devices. This SB-6 works great between your pedalboard or with your wireless system.