Quested VS1115 Single #1048 (Used)

Quested VS1115 Single #1048 (Used)

$1,695.00
$1,695.00
Skip to product information
Quested VS1115 Single #1048 (Used)
  • Quested VS1115 Single #1048 (Used)
  • Quested VS1115 Single #1048 (Used)
Quested

Quested VS1115 Single #1048 (Used)

Active high power, reference subwoofer

Product No Longer Available

Need help finding a different option? We can help.

Experts At Your Service

Have a question? Our Audio Consultants and Technicians have years of real-world experience and are ready to help.

Call now

Product Description

Excellent condition sub woofer.

Product Description

  • Drivers: Bass: 380 mm (15 in)
  • Maximum SPL LCR 110dB(C)
  • Inputs Connectors: 4 off XLR Female: Left, Centre, Right, Effects
  • Electronically balanced RFI filtered Wiring: Pin 1 Ground, Pin 2 Hot, Pin 3 Cold
  • Outputs: Connectors: 4 off XLR Male: Sub, Left, Centre, Right
  • Impedance: > 100 ohm electronically balanced Wiring: Pin 1 Ground, Pin 2 Hot, Pin 3 Cold
  • Full Range Channels L,C,R input to output
  • High Pass: 38HZ at 12dB/oct.
  • Passband gain: 0dB
  • Sub Woofer Channel Signal Path: All inputs are passband filtered and summed to Sub output and Sub amplifier.
  • L,C,R input to Sub: High pass: 15Hz at 18dB.oct. Low pass: 38Hz at 12dB.oct.
  • Effects input to Sub: High pass: 15Hz at 18dB.oct. Low pass: 100Hz at 12dB.oct.
  • Effects level trim: +/- 10dB
  • Sensitivity switch: +4dBu for nominal level: clip > +16dBu input at 22 Hz or -10dBu for nominal level: clip > +2dBu input at 22 Hz
  • Level Trim: Rear rotary preset +/- 10dB
  • Signal Polarity: Rear switch to invert sub channel polarity
  • Phase Correction: Rear rotary preset to adjust 10-170 degrees at 38 Hz
  • Power Amplifer:
  • Sub output power >400W rms into 8 ohm continuous.*
  • T.H.D. <0.03% at levels up to 1dB below clip, 10Hz - 100Hz typ. 0.005% at 20W rms 20Hz.
  • Hum + Noise >-105dB referred to clip
  • Indication: Power on Front mounted LED (green) indicates power applied
  • Overload Front mounted LED (red) indicates 0.5dB below signal clip.
  • Thermal protection: Front mounted LEF turns red, signal is muted and amplifier switches to standby mode during thermal protection cooling cycle. Normal operation resumes when heatsink temperature drops by 20 C.
  • Power requirements: Voltage Set by internal plug: nominal 115V or 230V at 50 - 60Hz AC. 230V setting: Min 160V (restricted output power): Max 263V 115V setting: Min 80V (restricted output power): Max 132V
  • Consumption Quiescent: 45W.
  • Typical use: 150W. Max: 580W.
  • *Note: The continuous rating is for a period not exceeding 5 minutes with unrestricted airflow (100mm clearance) around the amplifier heatsinks and ambient temperature <30 C.
  • Size (WxHxD) 685mm x 550mm x 695mm (27" x 21.75" x 27.5")
  • Weight 62 kgs (137 lbs)