{"product_id":"neumann-u47-fet-reissue-10483-used","title":"Neumann U47 FET Reissue #10483 (Used)","description":"\u003ch3 id=\"toc_0\"\u003eTHE RETURN OF A CLASSIC\u003c\/h3\u003e\r\n\u003cp\u003eIt’s been over 45 years since the original U 47 FET was last built and Neumann has decided to bring back the microphone in a special collector’s edition format. Following exact schematics and original production documents, Neumann has revived the U 47 fet and will be packaging it in a high-quality wooden case with a certificate featuring the microphone’s serial number.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eTHE LEGEND OF THE U 47 FET\u003c\/h3\u003e\r\n\u003cp\u003eAfter stopping production on the tube-based U 47 microphones in the mid 1960s, Neumann’s team of technicians began developing the same microphone with transistors. The resulting mic, the U 47 FET, utilized the same capsule as the original (K47), but could better handle high sound pressure levels without affecting the resulting recording. Thus, a new tradition of putting Neumanns directly in front of loud amps was born.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eBEHIND THE U 47 FET SOUND\u003c\/h3\u003e\r\n\u003cp\u003eThe U 47 FET is a condenser mic with FET 80 circuitry and a cardiod directional characteristic. Employing a K47 capsule, the microphone is a double large-diaphragm capsule that will have a slight boost above 2kHz. The mic features a low-cut filter that is switchable and can reduce the cutoff frequency from 40Hz to 140Hz, while the attenuation switch can lower transmission levels by 10dB. In an effort to stop overloading, the output signal can also be lowered, thanks to a switch on the bottom of the microphone.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_3\"\u003eSPECIFICATIONS:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAcoustical op. principle: Pressure gradient transducer\u003c\/li\u003e\r\n\u003cli\u003eDirectional pattern: Cardioid\u003c\/li\u003e\r\n\u003cli\u003eFrequency range: 40 Hz to 16 kHz\u003c\/li\u003e\r\n\u003cli\u003eSensitivity at 1 kHz into 1 kohm: 8 mV\/Pa\u003c\/li\u003e\r\n\u003cli\u003eRated impedance: 150 ohms\u003c\/li\u003e\r\n\u003cli\u003eRated load impedance: 1000 ohms\u003c\/li\u003e\r\n\u003cli\u003eSignal-to-noise ratio, CCIR (rel. 94 dB SPL): 69 dB\u003c\/li\u003e\r\n\u003cli\u003eSignal-to-noise ratio, A-weighted (rel. 94 dB SPL): 76 dB\u003c\/li\u003e\r\n\u003cli\u003eEquivalent noise level, CCIR: 25 dB\u003c\/li\u003e\r\n\u003cli\u003eEquivalent noise level, A-weighted: 18 dB-A\u003c\/li\u003e\r\n\u003cli\u003eMax. SPL for THD \u0026lt; 0.5 %: 137 dB\u003c\/li\u003e\r\n\u003cli\u003eWith pre-attenuation: 147 dB\u003c\/li\u003e\r\n\u003cli\u003eMax. output voltage for THD \u0026lt; 0.5 %: -3.3 dBu\u003c\/li\u003e\r\n\u003cli\u003ePower Supply (P48, IEC 61938): 48 V ± 4 V\u003c\/li\u003e\r\n\u003cli\u003eCurrent consumption (P48, IEC 61938): 0.5 mA\u003c\/li\u003e\r\n\u003cli\u003eWeight: 710 g\u003c\/li\u003e\r\n\u003cli\u003eDimensions: 63 x 160 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":44450848505959,"sku":"176724","price":3795.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/neumann-u47-fet-10483-vintage_176724_1_e85e9e54-db03-42e7-9b0b-cb0cddeff191.jpg?v=1787094783","url":"https:\/\/vintageking.mom\/products\/neumann-u47-fet-reissue-10483-used","provider":"Vintage King","version":"1.0","type":"link"}