EarthQuaker Devices Terminal Destructive Fuzz

Product Description

The Earthquaker Devices Terminal Destructive Fuzz is a blown out, busted and all around destructive fuzz device modeled after the old JAX fuzz. For those not in the know, the JAX fuzz is a re-branded Shin Ei Companion fuzz that is well loved for its buzzy sound. The Terminal takes this design three steps further by allowing control over the gain, fine tuning of the EQ and a massive adjustable volume boost. The Voice controls the upper and lower mid range determining the over all frequency response while the Treble adjusts the biting top end. The Fuzz control goes from a gritty “separated” drive to a pinched, searing grind. Between these three interactive controls you will find a wide range of blistering fuzz tones at your disposal. Not only does the terminal rip on guitar, it’s one of the best bass fuzz pedals ever heard. Seriously, it rules on bass! The Terminal fuzz has all archaic analog circuitry, true bypass switching and is made one at a time by real human beans in Akron, Ohio.

Controls

• Volume: Controls output volume level as you dial it clockwise.
• Voice: Clockwise for upper mids, counter clockwise for lower mids.
• Treble: Clockwise for more bite, counterclockwise for less.
• Fuzz: Clockwise for more blow outs, counterclockwise for less.

Measures

• 4 5/8″ x 2 1/2″ x 2.25″ with knobs

Power

Earthquaker pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 10 mA.