Disaster Area Designs TNT - Black

Product Description

The Disaster Area TNT Triple Output Tap and Favorite Footswitch is Disaster Area's advanced tap tempo foot switch with integrated favorite / toggle functionality.

The TNT is simple to use: Just tap it to send taps to your connected devices, or hold it to toggle between states. The TNT may be used to control up to three different tap tempo devices, or as a master favorite switch for up to three devices, or any combination. Each output is isolated and designed to eliminate crosstalk and prevent ground loops between your devices. No other foot switch comes close to the explosive power of the TNT.

Compatibility:

The TNT is compatible with virtually every pedal or effects unit equipped with a remote tap tempo input jack. In favorite / toggle mode, the TNT can work as a “fixed expression” control with many devices. Please note that some devices may require the use of a TRS / stereo cable or to have the TNT’s pull-up resistors enabled for certain functions.

• Alexander – Tap: History Lesson, Super Radical, Oblivion
• Alexander – Favorite: Super Radical, Oblivion
• BOSS – Tap / OUTPUT C ONLY DD-5, DD-7, DD-20, RE-20 (requires connected output set to normally closed)
• Catalinbread – Semaphore
• Chase Bliss – All pedals
• Cusack – Tap-A-Whirl, Tap-A-Delay, Tap-A-Phase, Tap-A-Scream, more. (requires 1/4″ to RCA cable)
• Disaster Area – All controllers with expression input, DMC-6D expander jack input (with TRS cable.)
• Electro-Harmonix – Tap: Deluxe Memory Man with Tap 1100 / 550, Super Pulsar
• Electro-Harmonix – Expression: HOG2, Pitch Fork, Cock Fight, more
• Eventide – H9, Timefactor, Modfactor, Pitchfactor, Space
• JHS – Panther, Panther Cub, Emperor, Unicorn
• Line 6 – Favorite / Expression: AM-4, DL-4, DM-4, MM-4, M5, M9, M13. Not compatible for tap tempo with Line 6.
• Matthews Effects – Conductor
• Strymon – Tap: Timeline, Mobius, BigSky, Flint, Deco, Dig
• Strymon – Favorite: Brigadier, Deco, DIG, El Capistan, Flint, Lex
• Walrus Audio – Tap: Bellwether
• Walrus Audio – *Favorite: Vanguard, Descent (use expression pedal input)

Configuration:

• Press and hold the power switch at boot to cycle through switch configurations.
• The LED will light for 1 second, then blink ON to indicate the outputs set to Toggle / Favorite.
• Holding the footswitch at boot will cause one more output to be set to Toggle each time.
• After all three outputs are set to Toggle, the unit will switch over to “NC” / Boss mode. In this mode, the output closest to the DC power jack will be reversed polarity in order to work with Boss pedals such as the DD-5, DD-7, and DD-20. In NC mode, the LED will stay lit and blink OFF to indicate the Toggle outputs.
• Once all three outputs are set to Toggle in “NC” mode, the unit will reset to normal mode with no Toggles enabled.
• The TNT remembers your last setting when powered off.