Experts At Your Service
Have a question? Our Audio Consultants and Technicians have years of real-world experience and are ready to help.
Product Description
The Chandler Limited TG12411 Channel, formerly known as the TG Channel MKII, is a recreation of several classic EMI circuits. It combines a TG2 pre amp section with an equalizer that was adapted from a circuit in the TG12410 Transfer console. This console was the mastering counterpart to the original "Beatles desks" installed at Abbey Road.
The active portions of the unit use the same discrete amplifiers and transformers as in the TG1 Limiter and TG2 pre amp. The passive equalizer portion of the EQ is an all inductor design and offers sweet high frequencies with large inductor based lows, and a very high "Q" mid cut section. Although not designed as such, due to its passive inductor design the unit will inevitably draw comparisons to the Pultec EQP-1A3, a VERY simple description would be to call it an EMI Pultec with an EMI pre amp thrown in.
LOW EQ
A low boost control with 20 dB of gain and a select switch that combines shelf and peak settings. Both peak and shelf characteristics are inductor based, and on the peak settings "Q" gets sharper with more boost. 50, 70, 100, 200 peak. 100, 200 shelf. 100 Hz low cut.
MID EQ
A mid frequency EQ with 20 dB of cut with six points set at very sharp "Q". Specially designed to fix problem areas. All inductor based. 350, 400, 500, 600, 700, 850 Hz.
HIGH EQ
A highboost control with 18 dB of gain and a select switch that combines shelf and peak settings. Shelf characteristic is resistor capacitor based and the peak types are inductor style. 16k, 12k, 8.1k, 6.8k shelf. 5.8 k, 3.9k, 2.2k, 1.8k, 1.2k peak. HI-Q switch for peaks.
INPUT
Combines 2.4k ohm mic input and and a 10k line input which is selectable with the line switch. The fifteen position switch attenuates mic and line and gives a large range of control for normal and not so normal uses. mic gain -15 dB to +65 dB line gain -25 dB to +45 dB.
OUTPUT
Functioning as a console fader, this control is placed after the input stage and before the out put stage. This allows for trimming of the input signal, as well as allowing the user to run the input very hot (for extra coloration) without distorting the recorder.
Features
Specifications
| Chassis | |
|---|---|
| Tube or Solid State | |
| Rack format | 19-inch rackmount 1U |