Experts At Your Service
Have a question? Our Audio Consultants and Technicians have years of real-world experience and are ready to help.
Product Description
The dynamic beyerdynamic TG D50d microphone is exceptionally useful for miking drums. At the bottom there is a switch to select between LIN (linear) and EQ (Equalizer) frequency responses. If the switch has been set to LIN , the microphone can be used for miking toms, snare and other instruments. If the switch has been set to EQ, the microphone can be specially used for kick drums, supplying an appropriate frequency response and balanced sound without complicated settings on the mixing console. By using the ST 99 stand the microphone can also be placed inside the kick drum. The mass-reduced special diaphragm supplies absolute impulse fidelity and high gain before feedback.
Specifications
- Transducer type: Dynamic
- Operating principle: Pressure gradient
- Polar pattern: Cardioid
- Frequency response
- Close miking (switch position LIN): 50 - 17,000 Hz
- Close miking (switch position EQ): 20 - 15,000 Hz
- Distant miking (switch position LIN,
- measured at 1 m): 80 - 17,000 Hz
- Open circuit voltage
- (switch positon LIN): 2.4 mV/Pa (-52.5 dBV) ±3 dB
- Open circuit voltage
- (switch positon EQ): 0.9 mV/Pa (-60.9 dBV) ±3 dB
- Nominal impedance
- (switch position LIN): 600 Ω
- Nominal impedance
- (switch position EQ): 200 Ω
- Load impedance: ≥ 2 kΩ
- Connection: 3-pin XLR connector, male
- Length: 104 mm
- Shaft diameter: 24 mm
- Head diameter: 41 mm
- Weight (without clamp): 134 g
- Weight (with clamp): 189 g
Features
Specifications
| Package Contents | |
|---|---|
| Diameter | |
| Length | |
| Frequency Range | |
| Impedance | |
| Number of Microphones | |
| Output Connectors | Analog XLR |
| Polar Pattern | Cardioid |
| Sensitivity | |
| Transducer Type | Dynamic |
| Tube or Solid State |