Aviom AN-16/i-M (Front)

Aviom AN-16/i-M

$2,520.00
$2,520.00
Skip to product information
Aviom AN-16/i-M (Front)
  • Aviom AN-16/i-M (Front)
  • Aviom AN-16/i-M
Aviom

Aviom AN-16/i-M

MFR# AN-16/i-M

16-Channel Mic-and Line-Level Input Module

Product No Longer Available

Need help finding a different option? We can help.

Experts At Your Service

Have a question? Our Audio Consultants and Technicians have years of real-world experience and are ready to help.

Call now

Product Description

The Aviom AN-16/i-M Mic Input Module is a 16-channel Pro16 input device with sixteen high-quality mic preamps and 24-bit A-to-D converters. It’s a great front end for a personal monitor mixing system when you need to plug your mic- and line-level input sources into the input module first and then continue on to the mixing console using its built-in splitter.

To create a digital snake, connect the AN-16/i-M to a Pro16 output device like the AN-16/o v.4 Output Module.

Specifications

  • Audio Inputs: 16, balanced mic- or line-level, XLR combo connector
  • XLR Input (mic/line): Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
  • TRS Line Inputs, &
  • Send/Return Tip: Audio +; Ring: Audio -; Sleeve: Ground
  • Audio Thru XLR; Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
  • Direct coupled passive throughput
  • Insert Send: Impedance balanced; Nominal level: 0dBu; Peak
  • Level (A/D clip point): +14dBu
  • The Insert Send connector is a line output in the signal path post gain, post filter, and post phase controls.
  • Insert Return: TRS balanced; Nominal level: 0dBu; Peak Level
  • (A/D clip point): +14dBu
  • The Insert Return connector is a line input to the signal path that is pre A/D conversion.
  • Analog to Digital Conversion: 48kHz sample rate, 24 bit
  • Operating Level: +4dBu
  • Frequency Response: 4Hz-22kHz
  • A-Net Output: One Category 5 (RJ45 connector)
  • A-Net Expansion: One Category 5 (RJ45 connector)
  • Gain Range Mic: +6dB to +60dB; Line: -15dB to +36dB
  • Channel LED Indicators: Signal Present and Clip, per channel
  • Line Inputs Impedance: 48k ohms
  • Metering: LEDs; green: Signal Present, red: Clip; per channel
  • Stereo Operation: Stereo Link, per channel pair;
  • Two-position switch (Normal, Link)
  • Maximum Input Level Mic: +14dBu; Line: +28dBu
  • Input Impedance Mic: 2.4k ohms; Line (TRS): 33k ohms;
  • Insert Return: 39k ohms
  • A/D Freq. Response: -0.1dB @ 20kHz (-0.4dB @ 20.0kHz, measured
  • from Mic or Line in)
  • -3dB @ 1.5Hz (-3dB @ 2.0Hz, measured from Mic or Line in)
  • THD +N: < 0.003%
  • Crosstalk: -90dB
  • Bit Error Rate (BER): 10(-12)
  • Signal to Noise (unweighted): A/D: -105dB Reference = +14dBu (A/D clip point) Send jack: -113dB (Gain = minimum)
  • EIN (Equivalent Input Noise): -128dBu
  • (Rs = 150 ohms, 20kHz BW, Gain = +60dB)
  • CMRR (Common Mode Rejection Ratio): 80dB @
  • 120Hz (Gain = +60dB)
  • Low Cut Filter: -3dB @ 85Hz, -18 dB per octave
  • Phantom Power: +48 volts, per channel, switch with LED
  • Digital Outputs A-Net: 2 (Main and Aux); A-Net Expansion: 1
  • Pro16 A-Net: A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable uses unshielded Cat-5e UTP (or better) cable
  • Latency: <0.880 msec (measured from analog input to analog output)
  • Power Supply: Internal, universal switching type; IEC jack
  • Voltage: 100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL
  • Dimensions: 19" x 9.25" (482.6 x 234.95 mm); 3U high
  • Weight: 12 lb(5.44 kg)
  • Options: SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable