{"title":"Walrus Audio","description":null,"products":[{"product_id":"walrus-audio-bellwether-analog-delay","title":"Walrus Audio Bellwether Analog Delay","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Bellwether\u003c\/strong\u003e is a bucket brigade delay pedal with tap tempo.  Offering analog circuity and up to 1000ms of lush delays, the Bellwether ushers in a rich soundscape of long and short trails. It can achieve the warm saturated sounds found in delays like the Maxon AD999 and the coveted Boss DM-2. Inversely, the repeats can also be brightened up with the tone control for more pronounced rhythmic delays.  The Analog Chorus Engine allows you to manipulate the depth and rate of the chorus effect applied to your trails; creating a deep soundscape of ambient modulation.  Set the time and repeat controls low to get that classic western slap back sound or drag them out to achieve shoegaze perfection.  Take it all the way to 10 to achieve a self-oscillating delay.\u003cbr\u003e\u003cbr\u003eFour tap division options are offered to control the rhythm of your repeats: quarter notes, eighth notes, dotted eighth notes, and triplets.  Expression control options are offered to swing either the time or repeat controls back-and-forth.  Manipulate the time control to get that Johnny Greenwood oscillation or use it on the fly to manipulate the repeat control; adding long tails to your diamonds.\u003cbr\u003e\u003cbr\u003eThere are seven rotary controls with black aluminum control knobs:  Tap Division, Time, Repeats, Tone (high-cut), and Level (of repeats). The bottom two rotary controls regulate the Analog Chorus Engine’s Rate and Depth.  This section is employable with an on\/off toggle. The Bellwether has five 1\/4” inch input jacks on the top side of the enclosure: input, two outputs, an effects loop, and expression control. The expression jack receives a TRS input to manipulate time or repeats; selectable by a toggle on the front of the pedal. There are two heavy duty foot-switches: one for effect on\/off and the other controlling the tap tempo controls by moving your foot up or down on the expression pedal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. Power requirements are 9VDC (100mA minimum)\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449787740263,"sku":"52281","price":349.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_bellwether_c46e72ec-33b5-43f9-9b2e-b4d73a254b81.jpg?v=1787090413"},{"product_id":"walrus-audio-deep-six-compressor-effects-pedal","title":"Walrus Audio Deep Six Compressor","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Deep Six\u003c\/strong\u003e is a true bypass studio-grade compressor in stomp box form, inspired by the performance of the Universal Audio 1176 with the simplicity of the Ross and Dynacomp. Offering a Level, Sustain, Attack, and Blend control, the Deep Six will give you unmatched versatility at a price you can afford. The pedal can be powered from a 9V battery or DC Supply. Polarity will never be an issue as the Deep Six comes standard with a polarity correction circuit. The internal voltage is doubled to 18 volts giving you the maximum amount of headroom for your sound while maintaining a typical current draw of 8.9mA for extended battery life. The Deep Six also offers a Blend and Attack control which allows you to use the pedal with active pickups or humbuckers. The blend feature allows you to use high output instruments while truly being able to dial out any distortion that may be present.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. Power requirements are 9V DC 8.9mA.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449787805799,"sku":"52282","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_deep_six_1_514ba66e-a9bf-439b-97de-9940809a8ddb.jpg?v=1787090414"},{"product_id":"walrus-audio-descent-reverb-effects-pedal","title":"Walrus Audio Descent Reverb Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Descent\u003c\/strong\u003e was designed to create ambient textures of sound, from thick and endless hall reverbs to symphonic shimmers. The Descent is a three mode reverb system; hall, reverse, and shimmer. In each mode, the user has the ability to feed +1 and -1 octaves into the reverberated signal. The Hall mode will feature a classic reverb sound that can move your signal from a small-room-echo to a haunting long hall- echo. The Reverse mode smoothly flips your signal to playback unique responses and can be manipulated with pre-delay time controls. Shimmer mode highlights the octave features, dry signal, -1, and +1 to mix in your signal and creates a symphony of sound.\u003cbr\u003e\u003cbr\u003eThe Descent offers you eight controls to precisely hone in your perfect reverb. In addition, the user can use an auxiliary momentary switch in the fav input to switch the pedal on\/off and\/or save presets. If you have an already crowded pedal board, you can set your Descent at the back of the board and run a small SPST switch to the front of the board so you don’t lose valuable real estate. The Fav input requires a TRS cable to be used. The expression pedal control works with most on-the-shelf expression pedals. This feature allows the user to set the high and low parameters of each control and then fade in and out the those controls by moving your foot up or down on the expression pedal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. 140mA Current Draw.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449787838567,"sku":"52283","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_descent_6c1bcce0-651b-4ec2-a75c-26336ca40d12.jpg?v=1787090414"},{"product_id":"walrus-audio-janus-fuzz-tremolo-effects-pedal","title":"Walrus Audio Janus Fuzz and Tremolo Pedal with Joystick Control","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Janus\u003c\/strong\u003e is a true bypass, dual joystick controlled Tremolo\/Fuzz pedal that allows you to create a landscape of distorted textures. Both the Tremolo and the Fuzz can be isolated and used alone, but can also be used together in series creating thick textures with a lot of movement. Each joystick has a separate X and Y axis that has designated controls. The Tremolo joystick controls the rate and depth while the Fuzz joystick controls the amount of fuzz and the tone. There are individual Volume controls for both effects and a Blend control for the Fuzz that allows the user to mix unaffected signal with the effected fuzz signal.\u003cbr\u003e\u003cbr\u003eThe joystick controls make the Janus a great option for guitars, vocals, keys, or tracks.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. Power requirements: 9V DC – 8 mA.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449787904103,"sku":"52284","price":260.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_janus_81c74cb7-37b1-4244-a3fa-72246ee97354.jpg?v=1787090415"},{"product_id":"walrus-audio-jupiter-fuzz-effects-pedal","title":"Walrus Audio Jupiter Fuzz","description":"\u003cp\u003eFuzz pedals tend to emphasize specific frequency ranges, which is both a positive and negative attribute. The controls on the \u003cstrong\u003eWalrus Audio Jupiter\u003c\/strong\u003e allow you the ability to dial in the right amount of fuzz with the right tonal quality to either stand out in the mix, or ride it out with the drums and rhythm. It includes a Mode switch that changes between three different clipping diode arrangements, providing more options and combinations of fuzz and tone and a Bass boost toggle switch for increased low end.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. Power requirements: 9V DC 10mA.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449787936871,"sku":"52286","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_jupiter_643f0c93-9bc7-45c7-b6c3-bd99a26c60b2.jpg?v=1787090415"},{"product_id":"walrus-audio-voyager-preamp-overdrive-effects-pedal","title":"Walrus Audio Voyager Preamp and Overdrive","description":"\u003cp\u003eFrom its lowest to highest settings, the \u003cstrong\u003eWalrus Audio Voyager\u003c\/strong\u003e provides a uniquely superb amount of clarity to any style of playing. At lower gain settings, it brightens the signal and adds clarity to each note played. With the gain turned up, the Voyager transforms into a thick overdrive, providing depth to chorded playing while retaining the clarity needed to break through on solos.  Has True Bypass switching.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. Power requirements: 9V DC 20mA.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449787969639,"sku":"52288","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_voyager_1_4be56ba4-5ac4-4507-82bf-b6d7425b9971.jpg?v=1787090415"},{"product_id":"walrus-audio-vanguard-dual-phase-pedal","title":"Walrus Audio Vanguard Dual Phase Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Vanguard\u003c\/strong\u003e was designed to create evolving beds of sound; from thick and sweeping harmonics to symphonic tidal waves. It operates as a series phaser system – two phasers working together to give unimaginable texture. The user has three selectable modes to shape the series phaser, sending your signal through a single 10-stage phaser with the option to pass through a second phaser. The second phaser, found on the second row of rotary controls, offers three different phaser voicings at the flip of a toggle switch; 10-stage with regeneration, 4-stage with pitch bend, and 6-stage with filter. This generates anything from slow phased foothills to untamed and violent sweeps.\u003cbr\u003e\u003cbr\u003eThe Vanguard gives you eight controls in total. Though it offers many options, it is simple and intuitive to use. If you desire to use only one of the four phasers on the Vanguard (one main phaser with the top controls and three selectable phaser voicings on the bottom row of controls), simply set the undesired phaser’s controls to zero and set the desired phaser’s controls to your unique setting. On the topside of the Vanguard the user can run one input (stereo with TRS-Y cable), two outputs, expression control, and a Remote input to use of an auxiliary momentary switch to both switch the pedal on\/off and\/or save presets. If you already have a crowded pedal board, you can set your Vanguard at the back of the board and run a small footprint dual SPST switch to the front of the board so you don’t lose valuable real estate. The Remote input requires a TRS cable to be used. The expression pedal control works with most on-the-shelf expression pedals. This feature allows the user to set the high and low parameters for any control and then fade between those settings by moving your foot up or down on the expression pedal.\u003cbr\u003e\u003cbr\u003eThe Vanguard comes in a copper colored enclosure featuring original artwork of two patrol men on horseback in a post-apocalyptic world. They are stuck between two phases: humanity’s past and humanity’s future. Hear the tension of their existence when you plug in your instrument.\u003c\/p\u003e\r\n\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. Power requirements: 9VDC (150mA minimum)\u003cbr\u003e\u003cbr\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449788100711,"sku":"52496","price":204.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_vanguard_118c9a94-6c87-4f80-b0aa-0f1a1e5e35bf.jpg?v=1787090415"},{"product_id":"walrus-audio-aetos-120v-clean-power-supply","title":"Walrus Audio Aetos 120V Clean Power Supply","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Aetos\u003c\/strong\u003e is an 8-output, isolated power supply, utilizing an internal custom wound toroidal transformer to provide the highest noise filtering and cleanest power, giving artists the purest sound in their signal chain. The Aetos is housed in a solid die cast enclosure and is 4.7”long x 3.7” wide x 2” height and has 8 total 9VDC outputs, 6 are 100mA and 2 outputs are high current outputs (300mA) for higher current drawing pedals like line 6 DL series modelers, the Boss Twin Series Pedals and many digital modulation pedals on the market. It comes with a detachable 230V AC Power cord. This unit comes with 8 – 2.1mm barrel black power cables and 2 black-to-red (Line 6) power cables. Fits under most pedal boards including Pedaltrain (PT JR and up), Pedal Pad, Blackbird Boards, Creation Music Company, and Holeyboards.\u003c\/p\u003e  \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDimensions: 4.7”long x 3.7” wide x 2” height\u003c\/li\u003e \u003cli\u003eWeight: 3 lbs.\u003c\/li\u003e \u003cli\u003eInput: 120VAC\u003c\/li\u003e \u003cli\u003eOutput: 6 outputs – 9VDC (100mA), 2 outputs – 9VDC (250mA)\u003c\/li\u003e \u003cli\u003eFully Isolated DC Power: Toroidal transformer based supply\u003c\/li\u003e \u003cli\u003eItems Included: 5 ft 120VAC detachable power cord, 8 – 2.1mm black power cables, 2 – 2.5mm to 2.1mm (red to black) line 6 cables\u003c\/li\u003e \u003cli\u003e5 year warranty\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886142567,"sku":"56468","price":152.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-aetos-120v_56468_1_1b833f5d-702a-4ce9-a2ff-e17da474b30d.jpg?v=1787090814"},{"product_id":"walrus-audio-aetos-230v-clean-power-supply","title":"Walrus Audio Aetos 230V Clean Power Supply","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Aetos\u003c\/strong\u003e is an 8-output, isolated power supply, utilizing an internal custom wound toroidal transformer to provide the highest noise filtering and cleanest power, giving artists the purest sound in their signal chain. The Aetos is housed in a solid die cast enclosure and is 4.7”long x 3.7” wide x 2” height and has 8 total 9VDC outputs, 6 are 100mA and 2 outputs are high current outputs (300mA) for higher current drawing pedals like line 6 DL series modelers, the Boss Twin Series Pedals and many digital modulation pedals on the market. It comes with a detachable 230V AC Power cord. This unit comes with 8 – 2.1mm barrel black power cables and 2 black-to-red (Line 6) power cables. Fits under most pedal boards including Pedaltrain (PT JR and up), Pedal Pad, Blackbird Boards, Creation Music Company, and Holeyboards.\u003c\/p\u003e  \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDimensions: 4.7”long x 3.7” wide x 2” height\u003c\/li\u003e \u003cli\u003eWeight: 3 lbs.\u003c\/li\u003e \u003cli\u003eInput: 230VAC\u003c\/li\u003e \u003cli\u003eOutput: 6 outputs – 9VDC (100mA), 2 outputs – 9VDC (250mA)\u003c\/li\u003e \u003cli\u003eFully Isolated DC Power: Toroidal transformer based supply\u003c\/li\u003e \u003cli\u003eItems Included: 5 ft 230VAC detachable power cord, 8 – 2.1mm black power cables, 2 – 2.5mm to 2.1mm (red to black) line 6 cables)\u003c\/li\u003e \u003cli\u003e5 year warranty\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886175335,"sku":"56469","price":152.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-aetos-230v_56469_1_cc3ada89-6852-4299-b9c2-ffc2be7027de.jpg?v=1787090814"},{"product_id":"walrus-audio-iron-horse-distortion","title":"Walrus Audio Iron Horse Distortion","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Iron Horse\u003c\/strong\u003e is full of high gain and perfectly made for the rock guitarist in need of thick rhythm or cutting solos. Dial back the gain and it can be used as a thick, warm overdrive. The Iron Horse has three distortion modes operated by a toggle switch that changes between different clipping diodes providing more versatility in shaping the tone of the distortion. It has three control knobs: Level, Tone and Distortion and True Bypass switching.\u003c\/p\u003e   \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003ePower: 9V DC 10mA\u003c\/li\u003e \u003cli\u003eDimensions: 4.77 x 2.9 x 2.3 inches\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886208103,"sku":"56471","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-iron-horse_56471_1_4313d0d4-a3af-4dd2-bf7e-7d955197e93e.jpg?v=1787090815"},{"product_id":"walrus-audio-julia-chorus-vibrato","title":"Walrus Audio Julia Chorus\/Vibrato","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Julia\u003c\/strong\u003e is a fully analog, feature-rich chorus\/vibrato packed with a wide array of tonal landscapes begging to be explored. With controls like Lag, Dry-Chorus-Vibrato Blend, and selectable analog LFO wave shapes, you are able to dial in all types of classic and unique chorus\/vibrato sounds; some settings giving a familiar feel while others are not found on traditional chorus pedals.\u003c\/p\u003e     \u003cp\u003eA special feature of the Julia is the Lag control. The Lag knob lets you set the center delay time that the LFO effect modulates from. From smooth and tight modulation at lower settings, to warbling detune at maximum, the Lag knob adds a new dimension to the traditional Chorus\/Vibrato landscape.\u003c\/p\u003e     \u003cp\u003eWhile most chorus\/vibrato pedals offer a toggle to go between the two effects, we’ve provided a knob to blend between Dry, Chorus, into Vibrato (labeled d-c-v on the pedal). The Dry-Chorus-Vibrato Blend changes the ratio of dry to wet signal sent to the output. At minimum, you will hear no effect. Set it to noon for equal parts dry and wet – the traditional chorus setting. Set it to maximum for 100% wet – the traditional vibrato setting. Explore the ground between minimum and noon for adding slight amounts of movement to your dry signal (also making the Julia great on bass guitar). Explore the ground between noon and maximum for all sorts of unheard chorus\/vibrato combinations.\u003c\/p\u003e     \u003cp\u003eThe Julia comes in a deep lavender colored enclosure with surf green ink, featuring original artwork of the water mystery, Julia revealing the tip of her hand telling more of her true story.\u003c\/p\u003e   \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003ePower: 9V DC 10mA\u003c\/li\u003e \u003cli\u003eDimensions: 4.77 x 2.9 x 2.3 inches\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886240871,"sku":"56473","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-julia_56473_1_594859cf-9e98-407b-9fb7-7e61e2a49b60.jpg?v=1787090815"},{"product_id":"walrus-audio-mayflower-overdrive","title":"Walrus Audio Mayflower Overdrive","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Mayflower\u003c\/strong\u003e is a true bypass, midrange overdrive pedal that falls in-between the Voyager’s low gain preamp settings and the Iron Horse’s full and harmonically rich distortion. The Mayflower boasts a transparent, midrange signal that is great for cutting through or adding to the rhythm. It includes Level, Drive, Bass and Treble controls for a large range of tonal versatility. The Mayflower provides a transparent and organic sounding breakup that allows tweaking and shaping to boost your original tone.\u003c\/p\u003e   \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003ePower: 9V DC 10mA\u003c\/li\u003e \u003cli\u003eDimensions: 4.77 x 2.9 x 2.3 inches\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886306407,"sku":"56474","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-mayflower_56474_1_fb4a965b-62c5-4dbe-901c-64ac80d510e5.jpg?v=1787090815"},{"product_id":"walrus-audio-phoenix-120v-clean-power-supply","title":"Walrus Audio Phoenix 120V Clean Power Supply","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Phoenix\u003c\/strong\u003e clean power supply is a 15-output isolated power supply, utilizing two internal custom wound toroidal transformers to provide the highest noise filtering and cleanest power, giving artists the purest sound in their signal chain possible.\u003c\/p\u003e  \u003cp\u003eThe Phoenix fits under most pedal boards including Pedaltrain (PT JR and up), Pedal Pad, Blackbird Boards, Creation Music Company, and Holeyboards. The Phoenix comes in a durable midnight blue texture enclosure and can more than hold up to the demands of touring.\u003c\/p\u003e  \u003ch3\u003eIncludes:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eFifteen 2.1mm barrel black power cables\u003c\/li\u003e \u003cli\u003eTwo 2.5mm to 2.1mm (red to black)\u003c\/li\u003e \u003cli\u003eDetachable IEC cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886273639,"sku":"56477","price":251.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-phoenix_56477_1_347dccf8-2339-4c82-bc27-69a2bf5e9115.jpg?v=1787090815"},{"product_id":"walrus-audio-messner-overdrive","title":"Walrus Audio Messner Overdrive","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Messner\u003c\/strong\u003e is a low gain-transparent overdrive boasting a wide range of overdrive possibilities. It is designed to preserve the natural voice of your guitar by not coloring your tone, but giving the user the ability to dial in and out the exact amount of tone they desire.\u003c\/p\u003e  \u003cp\u003eA toggle switch allows the user to bypass the clipping diodes from the circuit in the open position and employ them in the closed position, allowing a wide range of breakup from subtle to dramatic. Flip it to the open position and dial in a lower drive setting to add subtle aggression to your tone. Run it in the closed position and turn the gain knob up for more compressed and punchy tones. The color control works in all modes, giving you the ability to dial in brighter tones as you turn it up and darker tones when turned down. If you are looking for a low gain, dynamic overdrive that won’t hide your guitar’s natural characteristics, meet the Messner.\u003c\/p\u003e  \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003ePower: 9V DC 10mA\u003c\/li\u003e \u003cli\u003eDimensions: 4.77 x 2.9 x 2.3 inches\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886339175,"sku":"56476","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-messner_56476_1_53309473-0ca2-4151-82bf-083161ee7727.jpg?v=1787090815"},{"product_id":"walrus-audio-transit-looper-clickless-3","title":"Walrus Audio Transit Looper Clickless 3","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Transit\u003c\/strong\u003e is a True Bypass Looper system useful for organizing your pedalboard and giving your pedals the benefit of True Bypass. The Transit can also be used to create a Signal Loop, which may contain any number of pedals all activated by a single switch. These pedals are effectively True Bypass as well.\u003c\/p\u003e  \u003cp\u003eThe Deluxe Transit Clickless True Bypass Switcher contains the same abilities as the Standard Transit Looper, however, it features a clickless switching system that provides an unprecedented amount of silence when turning on and off the channels.\u003c\/p\u003e  \u003cp\u003eThis version contains 3 channels\/loops.\u003c\/p\u003e  \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003ePower: 9V DC\u003c\/li\u003e \u003cli\u003eDimensions: 2.6in x 9.75in x 2in\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886437479,"sku":"56490","price":250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-transit-looper-3_56490_1_8f964d8e-b2f9-4891-b42e-f06e0629a118.jpg?v=1787090815"},{"product_id":"walrus-audio-plainsman-dual-stage-booster","title":"Walrus Audio Plainsman Dual Stage Booster","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Plainsman\u003c\/strong\u003e dual stage clean boost will increase the volume of your instrument signal when employed. It was designed to raise your signal volume without adding overdrive to your sound; to give your amp that extra push it needs to break into the voice you want to reach. The right toggle will give you the option to choose whether your maximum volume possible is an 8 decibel increase or 15 decibel increase from your existing volume. The left toggle allows you to run your signal through the tone control or bypass it completely. The volume control allows you to pick a signal between zero decibels and 8\/15 decibels past your unity volume.\u003c\/p\u003e  \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cp\u003ePower: 9V DC 8.9mA Dimensions: 4.77 x 2.9 x 2.3 inches\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886404711,"sku":"56489","price":59.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-plainsman_56489_1_ac66db2b-c9b0-44a1-b53d-9bde1ac00e7c.jpg?v=1787090815"},{"product_id":"walrus-audio-transit-looper-clickless-4","title":"Walrus Audio Transit Looper Clickless 4","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Transit\u003c\/strong\u003e is a True Bypass Looper system useful for organizing your pedalboard and giving your pedals the benefit of True Bypass. The Transit can also be used to create a Signal Loop, which may contain any number of pedals all activated by a single switch. These pedals are effectively True Bypass as well.\u003c\/p\u003e  \u003cp\u003eThe Deluxe Transit Clickless True Bypass Switcher contains the same abilities as the Standard Transit Looper, however, it features a clickless switching system that provides an unprecedented amount of silence when turning on and off the channels.\u003c\/p\u003e  \u003cp\u003eThis version contains 4 channels\/loops.\u003c\/p\u003e  \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003ePower: 9V DC\u003c\/li\u003e \u003cli\u003eDimensions: 2.6in x 9.75in x 2in\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886371943,"sku":"56491","price":300.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-transit-4_56491_1_453ea02a-27c1-4fef-935b-eb945afb9163.jpg?v=1787090815"},{"product_id":"walrus-audio-transit-looper-standard-1","title":"Walrus Audio Transit Looper Standard 1","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Transit\u003c\/strong\u003e is a True Bypass Looper system useful for organizing your pedalboard and giving your pedals the benefit of True Bypass. The Transit can also be used to create a Signal Loop, which may contain any number of pedals all activated by a single switch. These pedals are effectively True Bypass as well.\u003c\/p\u003e  \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003ePower: 9V DC\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449886470247,"sku":"56492","price":90.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-transit-1_56492_1_dff158ca-25b3-4088-a015-7ef60c5a25d3.jpg?v=1787090816"},{"product_id":"walrus-audio-luminary-octave-generator","title":"Walrus Audio Luminary Octave Generator","description":"\u003cp\u003eIntroducing the \u003cstrong\u003eWalrus Audio Luminary Quad Octave Generator\u003c\/strong\u003e; the Luminary is a powerful polyphonic quad octave generator with features for creating inspiring symphonic gusts of sound. Operating on the Analog Devices Sharc platform, the Luminary gives you the ability to dial in any combination of four separate octaves including -2, -1, +1, and +2, the user can craft many different complex sounds and textures with crystal clear and immediate octave tracking. The Luminary has three onboard presets available for saving your go-to sounds, as a well as live mode. This means the user can have up to four custom sounds available at any moment. Get epic steel sounds with the modulation control unengaged. You’ll find more experimental options with the filter control or a swirling chorus with the flutter control. Couple the Luminary with an expression pedal to expand its creativity even more.\u003c\/p\u003e  \u003cp\u003eFour octave options available -2, -1, +1, +2 – The four knobs across the top of the pedal control the level of each octave. With the Dry\/Wet control, the user can explore the ground between minimum and 12 o’clock to keep the octave signal lower than your dry signal for subtleness. The territory between 12 o’clock and maximum keeps the user’s dry signal lower than unity for a boastful octave sound.\u003c\/p\u003e  \u003cp\u003eThe Attack control dictates how fast the octaves bloom after the initial attack. Allow the octaves to swell in gradually at a higher attack setting. Hear immediate octave response with the attack control low or off. The Filter knob controls the cutoff of a low-pass filter on the octave signals and also increases an envelope type effect at higher settings. The Flutter knob enables a chorus effect that can be applied to the octaves. At zero, the chorus effect is off. Increasing this knob engages the chorus modulation and controls the rate of the effect. At lower settings, the user hears a lightly modulated seasick effect, and when set higher, the user can achieve some alluring ring modulation type sounds.\u003c\/p\u003e  \u003cp\u003eThe expression control allows the manipulation of any combination of these options to allow the user to customize the effectiveness of the Luminary: -1 and +1 octave volume, +1 octave volume, Attack, Flutter, and Dry\/Wet\u003c\/p\u003e  \u003cp\u003eThe Luminary comes in a sand pebble texture colored enclosure with black and red ink, featuring original artwork of a dystopian dictator’s watchful eye. Exact size of the diecast enclosure is 4.67” x 3.68” x 1.547”. Power requirements are 9VDC (250mA minimum)\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449898201191,"sku":"56395","price":239.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-luminary_56395_1_22d13406-f5bf-43a1-a3f4-55d7d25e5feb.jpg?v=1787090865"},{"product_id":"walrus-audio-385-overdrive-pedal","title":"Walrus Audio 385 Overdrive Pedal","description":"\u003cp\u003eDynamic, responsive, tube-like, and amp-like. Walrus Audio is extremely excited to announce the new \u003cstrong\u003eWalrus Audio 385 Overdrive\u003c\/strong\u003e that is boastfully responsible for all those adjectives.\u003c\/p\u003e  \u003cp\u003eFor decades now, guitarists in search of pure tone have been taking the tube-powered audio sections of vintage film projectors and using it as a guitar amp. Heads up – it sounds amazing. After endless hours of research on vintage Bell and Howell 385 Filmosound projector, Walrus has created a fantastic new overdrive modeled after the projector’s tone. The Bell and Howell 385 gracefully lends itself to create an amazing guitar amp. Its simple, but effective controls, plus dual 6V6 output section make for a simple and extremely responsive amp that has an amazing compressed overdrive when cranked.\u003c\/p\u003e  \u003cp\u003eTHIS was the sound and feel Walrus needed to shoot for in an amp-like pedal. The 385 was developed to have the same simple but effective tone control as it’s grandfather. The amp has this as well but bass and treble are stacked behind the single tone knob. With our design breaking them up, we allow for a much wider array of tones to be achieved. The user is able to boost and cut bass and treble, allowing them to be creative with mid-frequency scoops and bumps. The pedal is internally running at 18v, which helps us nail the same dynamic feel of the amp in a stomp box. This means it is extremely sensitive to how hard you dig in – just like the amp.\u003c\/p\u003e  \u003cp\u003eThe 385 comes in a matte black finish with yellow ink featuring original artwork of a vintage Belle and Howell 385 projector ready to give you the dynamic tone you’ve been searching for.\u003c\/p\u003e  \u003cp\u003eThe diecast enclosure’s exact size is 4.77\" x 2.6\" x 1.39\". Power requirements are 9VDC (100 mA minimum).\u003c\/p\u003e  \u003cp\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44449991360615,"sku":"61344","price":179.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-385-1_444559a4-4993-49be-a2c1-851582d14ef4.jpg?v=1787091234"},{"product_id":"walrus-audio-bellwether-analog-delay-demo-deal","title":"Walrus Audio Bellwether Analog Delay (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Bellwether\u003c\/strong\u003e is a bucket brigade delay pedal with tap tempo.  Offering analog circuity and up to 1000ms of lush delays, the Bellwether ushers in a rich soundscape of long and short trails. It can achieve the warm saturated sounds found in delays like the Maxon AD999 and the coveted Boss DM-2. Inversely, the repeats can also be brightened up with the tone control for more pronounced rhythmic delays.  The Analog Chorus Engine allows you to manipulate the depth and rate of the chorus effect applied to your trails; creating a deep soundscape of ambient modulation.  Set the time and repeat controls low to get that classic western slap back sound or drag them out to achieve shoegaze perfection.  Take it all the way to 10 to achieve a self-oscillating delay.\u003cbr\u003e\u003cbr\u003eFour tap division options are offered to control the rhythm of your repeats: quarter notes, eighth notes, dotted eighth notes, and triplets.  Expression control options are offered to swing either the time or repeat controls back-and-forth.  Manipulate the time control to get that Johnny Greenwood oscillation or use it on the fly to manipulate the repeat control; adding long tails to your diamonds.\u003cbr\u003e\u003cbr\u003eThere are seven rotary controls with black aluminum control knobs:  Tap Division, Time, Repeats, Tone (high-cut), and Level (of repeats). The bottom two rotary controls regulate the Analog Chorus Engine’s Rate and Depth.  This section is employable with an on\/off toggle. The Bellwether has five 1\/4” inch input jacks on the top side of the enclosure: input, two outputs, an effects loop, and expression control. The expression jack receives a TRS input to manipulate time or repeats; selectable by a toggle on the front of the pedal. There are two heavy duty foot-switches: one for effect on\/off and the other controlling the tap tempo controls by moving your foot up or down on the expression pedal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. Power requirements are 9VDC (100mA minimum)\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450023735399,"sku":"63747","price":219.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_bellwether_1_0123c449-da28-43b4-8024-7fe0e05ebdf1.jpg?v=1787091370"},{"product_id":"walrus-audio-red-high-gain-distortion","title":"Walrus Audio RED High-Gain Distortion","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Red\u003c\/strong\u003e is a mean, heavy, have no mercy distortion pedal. Inspired by the brutal, heavy tones found in early 90’s heavy metal and shoegaze bands, Walrus Audio has designed a new high gain distortion that is capable of achieving aggressive, pounding, thick tone that will appeal to everyone from skate punks, to heavy hearted chord spillers, to the Swedish Death Metal players. The RED is a versatile distortion that is sure to become the new high gain staple on players’ boards everywhere.\u003c\/p\u003e  \u003cp\u003eThe Texture switch provides two different configurations of clipping diodes. The down position selects the highest level of compression and clipping available. Use this mode for smooth singing leads and heavily compressed rhythm work. The up position selects the lowest level of compression and clipping available. Use this mode for a more course tone that is more overdrive-like in nature.\u003c\/p\u003e  \u003cp\u003eThe RED comes in a lightly textured black finish with red and white ink. Original artwork features a scientist looking into a microscope discovering the virus that is, The RED.\u003c\/p\u003e  \u003cp\u003eEnclosure’s exact size is 3.68” x 4.67” x 1.54”. Power requirements are 9 VDC (100 mA minimum).\u003c\/p\u003e  \u003cp\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450068856935,"sku":"73723","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-red_73723_1a_5fb93775-679f-4673-bc40-9357cab96bd4.jpg?v=1787091561"},{"product_id":"walrus-audio-war-horn","title":"Walrus Audio Warhorn","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Warhorn\u003c\/strong\u003e is a mid-range, transparent overdrive pedal that’s capable of punchy rhythm, to searing Texas Blues leads. For added versatility, the pedal features a toggle switch that provides two flavors of clipping. The up position is a more compressed, symmetrically clipped tone, and the down position is an asymmetric, more open and organic sound. It includes Level, Drive, Bass and Treble controls providing a large range of tweaking and shaping options for your original tone.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Warhorn comes in “prismatic gold” enclosure with white, cream and black ink. Artwork features a warrior at the front lines brandishing an intricate battle horn leading his army in a victorious battle.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450095399015,"sku":"78378","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-warhorn_78378_1_c825d157-0085-4568-8617-090d075845bc.jpg?v=1787091677"},{"product_id":"walrus-audio-transit-looper-clickless-5","title":"Walrus Audio Transit Looper Clickless 5","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Transit 5 Looper\u003c\/strong\u003e is a true bypass looper system useful for organizing your pedalboard and giving your pedals the benefit of true bypass.  The Transit can also be used to create a Signal Loop, which may contain any number of pedals all activated by a single switch. These pedals are effectively true bypass as well.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Clickless version contains the same abilities as the standard Transit Looper, however, it features a clickless switching system that provides an unprecedented amount of silence when turning on and off the channels.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450095431783,"sku":"52287","price":350.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-transit-5-clickless_52287_1_9a87704c-746f-4e0f-9ecb-e61aaa2dc088.jpg?v=1787091677"},{"product_id":"walrus-audio-monument-harmonic-tap-tremolo","title":"Walrus Audio Monument Harmonic Tap-Tremolo","description":"\u003cp\u003eInspired by the beautifully jagged, red-sand desert landscape of Monument Valley, the \u003cstrong\u003eWalrus Audio Monument Tremolo\u003c\/strong\u003e is both a harmonic, and standard tremolo that produces a rich, luscious, warm pulsating modulation capable of peaks and valleys as smooth or as jagged as the real ones that our dear mother nature created long ago.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith different combinations of the rate, division and shape knobs and tap tempo, everything from traditional tremolo to inspiring unique waveforms will help you carve new paths that you won’t hear anywhere else.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Division knob can be set to quarter, triplet, eighth and sixteenth.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWave shapes can be controlled via the Shape knob. You can move between Sine, Square, Ramp, Lumps and Monument Mode (random).\u003c\/p\u003e\r\n\r\n\u003cp\u003eA special feature on the Monument is the bypass switch also has a momentary function. When the switch is in off position, press and hold to temporarily activate the effect to add a moment of texture. Releasing the switch turns the effect off.\u003c\/p\u003e\r\n\r\n\u003cp\u003eSetting the depth knob at 0 and the volume knob above unity creates a clean boost.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450120073319,"sku":"79693","price":186.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-monument_79693_1_6b421a0b-d186-494f-8386-86a42a42009a.jpg?v=1787091776"},{"product_id":"walrus-audio-jupiter-fuzz","title":"Walrus Audio Jupiter V2 Multi-Clip Fuzz Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Jupiter Multi-Clip Fuzz V2\u003c\/strong\u003e is a true bypass fuzz pedal inspired by the desire for gritty, thick and loud fuzz. Fuzz pedals tend to emphasize specific frequency ranges, which is both a positive and negative attribute. The Jupiter’s controls allow you the ability to dial in the right amount of fuzz with the right tonal quality to either stand out in the mix, or ride it out with the drums and rhythm. It includes a Mode switch that changes between three different clipping diode arrangements, providing more options and combinations of fuzz and tone and a Bass boost toggle switch for increased low end.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450157068391,"sku":"86613","price":179.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-jupiter-v2_86613_1_c11ec28e-3aa0-49df-8361-1be6dec774f6.jpg?v=1787091913"},{"product_id":"walrus-audio-iron-horse-distortion-v2","title":"Walrus Audio Iron Horse LM308 V2 Distortion Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Iron Horse Distortion V2\u003c\/strong\u003e is a return to the classic distortion: thick, punchy, riffy and rowdy. The true bypass, high gain behemoth has been updated to help steer the stallion or let the reigns loose for full on distorted onslaught. Dial back the gain and it can be used as a thick, warm overdrive. The Iron Horse has three distortion modes operated by a toggle switch that changes between different clipping diodes providing more versatility in shaping the tone of the distortion. Left will give some compression. Right will give you a higher amount of compression and middle will give you a wide open, non compressed signal.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eV2 updates:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eUpdated Level control so that it is easier to dial in unity gain\u003c\/li\u003e\r\n\u003cli\u003eUpdated the Tone control to allow more treble to be dialed in if desired\u003c\/li\u003e\r\n\u003cli\u003eUpdated Distortion control to smooth out the range of distortion making it easier to dial in lower gain tones.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003cp\u003eThe Iron Horse V2 comes in a Galaxy Gold finish with black ink. Artwork by illustrator Adam Forster features a new battle ready stallion cloaked in armor.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIt is full of high gain and perfectly made for the rock guitarist in need of thick rhythm or cutting solos. Dial back the gain and it can be used as a thick, warm overdrive. The Iron Horse has three distortion modes operated by a toggle switch that changes between different clipping diodes providing more versatility in shaping the tone of the distortion. It has three control knobs: Level, Tone and Distortion and True Bypass switching.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450157101159,"sku":"86614","price":179.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-iron-horse-v2_86614_1_1fca8942-2205-4bf9-a7c1-ab43868e4d5a.jpg?v=1787091913"},{"product_id":"walrus-audio-arp-87-multi-function-delay","title":"Walrus Audio ARP-87 Multi-Function Delay","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio ARP-87 Multi-Function Delay\u003c\/strong\u003e is a compact, feature-rich delay, packed with a large pallet of inspirational delay tones. Featuring four main algorithms, digital, analog, lo-fi, and slap back, the ARP-87 can cover some serious ground in the world of echoes. The Digital algorithm boasts pristine, crystal clear repeats great for rhythmic riffs. The Analog setting works well to add warmth and dimension to chords and lines without getting in the way. The Lo-Fi algorithm, with its adjustable frequency range on the repeats, goes from warm, warped, and murky, to strait AM radio. Finally, the Slap setting makes it easy to dial in a great slap back echo perfect for smoking chicken pickin’ runs. With other features like our smart bypass switching, and momentary knob ramp, the ARP-87 provides endless creative opportunities that are waiting to be explored.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe X knob changes functions depending on which Algorithm you are using. It adjusts a specific parameter in each algorithm. In Digital, Analog, and Slap modes, the knob will control modulation depth. In Lo-fi mode, the knob will control Filter width.\u003c\/p\u003e\r\n\r\n\u003cp\u003eNote that when changing delay types this loads a whole new algorithm and the tempo must be tapped in again.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eTrails Mode\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe ARP-87 can be run in trails or no trails mode. In trails mode, when you turn the pedal off, the delay trails die off naturally. In no trails mode, the delay trails are abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eMomentary Functions\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWhen the switch is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of delay texture. Releasing the switch turns the effect off. When the effect is on, press and hold the bypass switch to momentarily ramp the X parameter to maximum. Releasing the switch sets the X parameter back to the knob location.\u003c\/p\u003e\r\n\r\n\u003cp\u003ePress and hold the Tap Switch to temporarily ramp the feedback to maximum. Release to set the feedback back to the knob location.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450157133927,"sku":"85797","price":179.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-arp-87_85797_1_b701536d-a2ec-4978-a46f-a0b96fad2df0.jpg?v=1787091913"},{"product_id":"walrus-audio-descent-reverb-demo-deal","title":"Walrus Audio Descent Reverb (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Descent\u003c\/strong\u003e was designed to create ambient textures of sound, from thick and endless hall reverbs to symphonic shimmers. The Descent is a three mode reverb system; hall, reverse, and shimmer. In each mode, the user has the ability to feed +1 and -1 octaves into the reverberated signal. The Hall mode will feature a classic reverb sound that can move your signal from a small-room-echo to a haunting long hall- echo. The Reverse mode smoothly flips your signal to playback unique responses and can be manipulated with pre-delay time controls. Shimmer mode highlights the octave features, dry signal, -1, and +1 to mix in your signal and creates a symphony of sound.\u003cbr\u003e\u003cbr\u003eThe Descent offers you eight controls to precisely hone in your perfect reverb. In addition, the user can use an auxiliary momentary switch in the fav input to switch the pedal on\/off and\/or save presets. If you have an already crowded pedal board, you can set your Descent at the back of the board and run a small SPST switch to the front of the board so you don’t lose valuable real estate. The Fav input requires a TRS cable to be used. The expression pedal control works with most on-the-shelf expression pedals. This feature allows the user to set the high and low parameters of each control and then fade in and out the those controls by moving your foot up or down on the expression pedal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. 140mA Current Draw.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450261500007,"sku":"99362","price":269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_descent_1_a2dd8889-99b0-4825-b1e2-a05261bffdc0.jpg?v=1787092360"},{"product_id":"walrus-audio-luminary-octave-generator-demo-deal","title":"Walrus Audio Luminary Octave Generator (Demo Deal)","description":"\u003cp\u003eIntroducing the \u003cstrong\u003eWalrus Audio Luminary Quad Octave Generator\u003c\/strong\u003e; the Luminary is a powerful polyphonic quad octave generator with features for creating inspiring symphonic gusts of sound. Operating on the Analog Devices Sharc platform, the Luminary gives you the ability to dial in any combination of four separate octaves including -2, -1, +1, and +2, the user can craft many different complex sounds and textures with crystal clear and immediate octave tracking. The Luminary has three onboard presets available for saving your go-to sounds, as a well as live mode. This means the user can have up to four custom sounds available at any moment. Get epic steel sounds with the modulation control unengaged. You’ll find more experimental options with the filter control or a swirling chorus with the flutter control. Couple the Luminary with an expression pedal to expand its creativity even more.\u003c\/p\u003e  \u003cp\u003eFour octave options available -2, -1, +1, +2 – The four knobs across the top of the pedal control the level of each octave. With the Dry\/Wet control, the user can explore the ground between minimum and 12 o’clock to keep the octave signal lower than your dry signal for subtleness. The territory between 12 o’clock and maximum keeps the user’s dry signal lower than unity for a boastful octave sound.\u003c\/p\u003e  \u003cp\u003eThe Attack control dictates how fast the octaves bloom after the initial attack. Allow the octaves to swell in gradually at a higher attack setting. Hear immediate octave response with the attack control low or off. The Filter knob controls the cutoff of a low-pass filter on the octave signals and also increases an envelope type effect at higher settings. The Flutter knob enables a chorus effect that can be applied to the octaves. At zero, the chorus effect is off. Increasing this knob engages the chorus modulation and controls the rate of the effect. At lower settings, the user hears a lightly modulated seasick effect, and when set higher, the user can achieve some alluring ring modulation type sounds.\u003c\/p\u003e  \u003cp\u003eThe expression control allows the manipulation of any combination of these options to allow the user to customize the effectiveness of the Luminary: -1 and +1 octave volume, +1 octave volume, Attack, Flutter, and Dry\/Wet\u003c\/p\u003e  \u003cp\u003eThe Luminary comes in a sand pebble texture colored enclosure with black and red ink, featuring original artwork of a dystopian dictator’s watchful eye. Exact size of the diecast enclosure is 4.67” x 3.68” x 1.547”. Power requirements are 9VDC (250mA minimum)\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450261532775,"sku":"99364","price":188.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-luminary_56395_1_1_a5274af5-5405-4076-bc52-acce788501d2.jpg?v=1787092361"},{"product_id":"walrus-audio-vanguard-dual-phase-pedal-demo-deal","title":"Walrus Audio Vanguard Dual Phase Pedal (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Vanguard\u003c\/strong\u003e was designed to create evolving beds of sound; from thick and sweeping harmonics to symphonic tidal waves. It operates as a series phaser system – two phasers working together to give unimaginable texture. The user has three selectable modes to shape the series phaser, sending your signal through a single 10-stage phaser with the option to pass through a second phaser. The second phaser, found on the second row of rotary controls, offers three different phaser voicings at the flip of a toggle switch; 10-stage with regeneration, 4-stage with pitch bend, and 6-stage with filter. This generates anything from slow phased foothills to untamed and violent sweeps.\u003cbr\u003e\u003cbr\u003eThe Vanguard gives you eight controls in total. Though it offers many options, it is simple and intuitive to use. If you desire to use only one of the four phasers on the Vanguard (one main phaser with the top controls and three selectable phaser voicings on the bottom row of controls), simply set the undesired phaser’s controls to zero and set the desired phaser’s controls to your unique setting. On the topside of the Vanguard the user can run one input (stereo with TRS-Y cable), two outputs, expression control, and a Remote input to use of an auxiliary momentary switch to both switch the pedal on\/off and\/or save presets. If you already have a crowded pedal board, you can set your Vanguard at the back of the board and run a small footprint dual SPST switch to the front of the board so you don’t lose valuable real estate. The Remote input requires a TRS cable to be used. The expression pedal control works with most on-the-shelf expression pedals. This feature allows the user to set the high and low parameters for any control and then fade between those settings by moving your foot up or down on the expression pedal.\u003cbr\u003e\u003cbr\u003eThe Vanguard comes in a copper colored enclosure featuring original artwork of two patrol men on horseback in a post-apocalyptic world. They are stuck between two phases: humanity’s past and humanity’s future. Hear the tension of their existence when you plug in your instrument.\u003c\/p\u003e\r\n\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.  Daisy chain power supplies are not recommended. Power requirements: 9VDC (150mA minimum)\u003cbr\u003e\u003cbr\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450261565543,"sku":"99360","price":162.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus_vanguard_1_a57fbaf6-cd86-4a72-9ac1-22d7970c141c.jpg?v=1787092361"},{"product_id":"walrus-audio-warhorn-demo-deal","title":"Walrus Audio Warhorn (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Warhorn\u003c\/strong\u003e is a mid-range, transparent overdrive pedal that’s capable of punchy rhythm, to searing Texas Blues leads. For added versatility, the pedal features a toggle switch that provides two flavors of clipping. The up position is a more compressed, symmetrically clipped tone, and the down position is an asymmetric, more open and organic sound. It includes Level, Drive, Bass and Treble controls providing a large range of tweaking and shaping options for your original tone.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Warhorn comes in “prismatic gold” enclosure with white, cream and black ink. Artwork features a warrior at the front lines brandishing an intricate battle horn leading his army in a victorious battle.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450261598311,"sku":"99363","price":144.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-warhorn_78378_1_1_80f8ed8c-c602-4a3c-862c-352e984963dd.jpg?v=1787092361"},{"product_id":"walrus-audio-luminary-v2","title":"Walrus Audio Luminary V2 Quad Octave Generator Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Luminary V2\u003c\/strong\u003e is a powerful polyphonic quad octave generator with features for creating inspiring symphonic gusts of sound. Operating on the Analog Devices Sharc platform, the Luminary gives you the ability to dial in any combination of four separate octaves including -2, -1, +1, and +2, the user can craft many different complex sounds and textures with crystal clear and immediate octave tracking. The Luminary has three onboard presets available for saving your go-to sounds, as a well as live mode. This means the user can have up to four custom sounds available at any moment. Get epic steel sounds with the modulation control unengaged. You’ll find more experimental options with the filter control or a swirling chorus with the flutter control. Couple the Luminary with an expression pedal to expand its creativity even more.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFour octave options available -2, -1, +1, +2 – The four knobs across the top of the pedal control the level of each octave. With the Dry\/Wet control, the user can explore the ground between minimum and 12 o’clock to keep the octave signal lower than your dry signal for subtleness. The territory between 12 o’clock and maximum keeps the user’s dry signal lower than unity for a boastful octave sound.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Attack control dictates how fast the octaves bloom after the initial attack. Allow the octaves to swell in gradually at a higher attack setting. Hear immediate octave response with the attack control low or off. The Filter knob controls the cutoff of a low-pass filter on the octave signals and also increases an envelope type effect at higher settings. The Flutter knob enables a chorus effect that can be applied to the octaves. At zero, the chorus effect is off. Increasing this knob engages the chorus modulation and controls the rate of the effect. At lower settings, the user hears a lightly modulated seasick effect, and when set higher, the user can achieve some alluring ring modulation type sounds.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe expression control allows the manipulation of any combination of these options to allow the user to customize the effectiveness of the Luminary: -1 and +1 octave volume, +1 octave volume, Attack, Flutter, and Dry\/Wet.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Luminary comes in a sand pebble texture colored enclosure with black and red ink, featuring original artwork of a dystopian dictator’s watchful eye. The exact size of the diecast enclosure is 4.67” x 3.68” x 1.547”. Power requirements are 9 V DC (250 mA minimum). Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450266546279,"sku":"99578","price":200.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-luminary-v2_99578_1_1_0b9ccb68-9971-400f-8b30-c31f24014515.jpg?v=1787092379"},{"product_id":"walrus-audio-phoenix-230v-clean-power-supply","title":"Walrus Audio Phoenix 230 V Clean Power Supply","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Phoenix 230 V Clean Power Supply\u003c\/strong\u003e is a 15-output isolated power supply, utilizing two internal custom wound toroidal transformers to provide the highest noise filtering and cleanest power, giving artists the purest sound in their signal chain possible.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith its 230 V transformers, the 230 V version can be used in Europe, Australia, and the United Kingdom.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Phoenix fits under most pedal boards including Pedaltrain (PT JR and up), Pedal Pad, Blackbird Boards, Creation Music Company, and Holeyboards. Walrus offers a pedal board mounting kit that is sold separately for Pedaltrain type decks. The Phoenix comes in a durable midnight blue texture enclosure and can more than hold up to the demands of touring.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450288074855,"sku":"56487","price":279.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-phoenix-230_56487_1_7d5609a9-bc7f-4108-ae60-52fc9ada0dd9.jpg?v=1787092466"},{"product_id":"walrus-audio-fathom-multi-function-reverb","title":"Walrus Audio Fathom Multi-Function Reverb Pedal","description":null,"brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450352169063,"sku":"110252","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-fathom_110252_1_10cf90c3-bfd2-4521-aba3-4cc4861e601a.jpg?v=1787092707"},{"product_id":"walrus-audio-defcon4-preamp-boost-eq","title":"Walrus Audio DEFCON4 Preamp\/Boost\/EQ","description":"\u003cp\u003eFrom the mind of Ryan Adams comes a new guitar utility with more tricks up its sleeve than a 1980s supervillain. The \u003cstrong\u003eWalrus Audio DEFCON4 Preamp\/Boost\/EQ\u003c\/strong\u003e works as a preamp and EQ to meticulously craft your guitar's sound. Bring peace time to your tone and avoid tedious amp tweaking during a set by using the DEFCON4 to easily switch from single coil to humbucking instruments with a quick twist of the rotary knobs. When the Launch switch is engaged, go into DEFCON 1 and activate a searing boost for your guitar.\u003c\/p\u003e\r\n\r\n\u003cp\u003eUse the Low (IV), Mid (III) and High Band (II) rotary knobs to cut and boost frequencies of your signal. The toggle switches will activate or bypass each frequency. When activated, the corresponding illuminated numbers will turn on. Flip the launch switch to go to “DEFCON 1” and activate a 10db MOSFET boost.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe concept came from how Ryan uses his setup live. He plays a Les Paul but when he switches to a lower output guitar like a Strat, he can’t easily get to his amps to adjust. Hence the idea for the Defcon4. He has it all set to where he wants and all he has to do it turn it on and he’s good to go for the next song.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFrom tone to knobs, Ryan worked very closely with us on exactly how he wanted it to look and sound. “I want this to look like someone from the 80s was pushing the technology they had available at the time.”\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe DEFCON4 comes in black texture enclosure with artwork inspired by the 1983 movie, \"WarGames\" and Ryan’s love for all things 80’s nostalgia.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe die-cast enclosure’s exact size is 3.68” x 4.67” x 1.547”. Power requirements are 9 VDC, center negative (100 mA minimum).\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450352201831,"sku":"110250","price":224.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-defcon4_110250_1_b6f0c73e-f4a3-403e-b362-c51b36087c99.jpg?v=1787092708"},{"product_id":"walrus-audio-emissary-parallel-boost","title":"Walrus Audio Emissary Parallel Boost Pedal","description":"\u003cp\u003e[em-uh-ser-ee] Anatomy. Sending or coming out, as certain veins that pass through the skull and connect the venous sinuses inside with the veins outside. Built from the ground up, Walrus Audio has developed a new 2-in-1 boost to help make leads stand out, slides sing, fingerpicking come to life and to push tube amps into great natural breakup. Like the veins its named after, the \u003cstrong\u003eEmissary Parallel Boost\u003c\/strong\u003e features two independent boost circuits running in parallel to work together to help give your tone a real “sinus clearing experience”. Use one or the other by itself, or mix any combination of both by turning up each knob to the desired level.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe top knob controls the volume for the “bright” boost circuit. This is a clean, high headroom JFET boost, with a slight emphasis on higher frequencies to liven up your tone. The bottom knob controls the volume for the “mid” boost circuit. This circuit features a targeted boost at either 1 kHz or 800 Hz selected by the toggle switch.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe bypass switch also features a momentary function. When the bypass switch is in off position, press and hold to temporarily activate the effect. Releasing the switch turns the effect off.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Emissary comes in a “Silk Satin Black” finish with light blue and white ink. Artwork by illustrator Adam Forster features an x-ray of a patients skull viewing the Emissary and other vital veins running through the head.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe die-cast enclosure’s exact size is 4.77” x 2.6” x 1.39”. Power requirements are 9 VDC (100 mA minimum).\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450352234599,"sku":"110251","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-emissary_110251_1_2a3cff28-21a1-4b0b-994d-661f4780f018.jpg?v=1787092708"},{"product_id":"walrus-audio-monument-tremolo-v2","title":"Walrus Audio Monument V2 Harmonic Tap Tremolo","description":"\u003cp\u003eThe Monument returns s the \u003cstrong\u003eWalrus Audio Monument Tremolo V2\u003c\/strong\u003e in a smaller form factor with new features including assignable expression control and rate ramp up.\u003c\/p\u003e\r\n\r\n\u003cp\u003eNew in V2:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eConverted to smaller enclosure\u003c\/li\u003e\r\n\u003cli\u003eExpanded capability of side jack: now supports external tempo or can function as expression control over Rate, Depth, Shape, or Tap Multiplier and is assignable on the fly\u003c\/li\u003e\r\n\u003cli\u003eImproved tremolo response across all rates\u003c\/li\u003e\r\n\u003cli\u003eTop mounted jacks\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003chr\u003e\u003cbr\u003e\r\n\r\n\r\n\u003cp\u003eInspired by the beautifully jagged, red-sand desert landscape of Monument Valley, the Monument Tremolo is both a harmonic, and standard tremolo that produces a rich, luscious, warm pulsating modulation capable of peaks and valleys as smooth or as jagged as the real ones that our dear mother nature created long ago.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith different combinations of the rate, division and shape knobs and tap tempo, everything from traditional tremolo to inspiring unique waveforms will help you carve new paths that you won’t hear anywhere else.\u003c\/p\u003e\r\n\r\n\u003cp\u003eHarken back to vintage tones inspired by Fender Brownface amps in Harmonic mode. A low-pass and high-pass version of your guitar signal are modulated opposite of each other, or 180º out of phase (high and low frequencies rise and fall opposite of each other). The result is a warm, almost “chewy” tremolo.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Division knob can be set to quarter, triplet, eighth and sixteenth. Wave shapes can be controlled via the Shape knob. You can move between Sine, Square, Ramp, Lumps and Monument Mode (random).\u003c\/p\u003e\r\n\r\n\u003cp\u003eA special feature on the Monument is the bypass switch also has a momentary function. When the switch is in off position, press and hold to temporarily activate the effect to add a moment of texture. Releasing the switch turns the effect off.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhen the pedal is on, press and hold the bypass switch to ramp up the tremolo rate. Release the switch and the rate will ramp down to previously set tempo. Setting the depth knob at 0 and the volume knob above unity creates a clean boost.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eExact size of the diecast enclosure is 4.77 x 2.9 x 2.3 inches\u003c\/li\u003e\r\n\u003cli\u003ePower requirements are 9VDC, Center negative, (100 mA minimum)\u003c\/li\u003e\r\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals - daisy chain power supplies are not recommended\u003c\/li\u003e\r\n\u003cli\u003ePower supply not included\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450406203495,"sku":"116772","price":169.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-monument-v2_116772_1_1_d7bd336c-eb25-4cf2-89ad-850f566f56e0.jpg?v=1787092934"},{"product_id":"walrus-audio-lillian-analog-phaser","title":"Walrus Audio Lillian Multi-Stage Analog Phaser Pedal","description":"\u003cp\u003eStrap into the co-pilot seat and join Lillian on a sonic journey. Leaving nothing behind but clean, puffy white trails of whirling, pulsating and whooshing analog Phase effect. Viewers from below admire in a trance as it transforms the air into a unique and mesmerizing moment. The \u003cstrong\u003eWalrus Audio Lillian Analog Phaser\u003c\/strong\u003e is a true bypass, all analog, multi-stage Phaser drawing inspiration from her cousin Julia. With controls like Rate, Width, Feedback, and D-P-V blend, the Lillian is packed with a wide array of analog phaser goodness waiting to be dialed in. The “Stages” switch allows the user to select 4 or 6 stages which alters the overall voice of the effect from warm and tight phasing with 4 stages to a more complex filtered sound with 6. The D-P-V knob lets you blend between dry, phase shifted, and vibrato sounds allowing for a wide range of control over the intensity and type of effect. Top mounted input, output, and power jacks as well as soft switch relay bypassing make the Lillian fit well on your board and ensure smooth operation for years to come.\u003c\/p\u003e\r\n\r\n\u003cp\u003eBorrowed from the Julia, the unique blend between Dry, Chorus and Vibrato has also been provided on the Lillian. Blend between Dry, Phase Shifted, and Vibrato (labeled d-p-v on the pedal). The Dry-Phase-Vibrato blend changes the ratio of dry to wet signal sent to the output. At minimum, you will hear no effect. Set it to noon for equal parts dry and wet – the traditional Phaser setting. Set it to maximum for 100% wet resulting in pitch vibrato. Explore the ground between minimum and noon for adding slight amounts of movement to your dry signal. Explore the ground between noon and maximum for all sorts of unheard phase\/vibrato combinations.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eExact size of the diecast enclosure is 4.77” x 2.9” x 2.3”\u003c\/li\u003e\r\n\u003cli\u003ePower requirements are 9 VDC (30 mA minimum)\u003c\/li\u003e\r\n\u003cli\u003ePower supply not included\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450408333415,"sku":"117354","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-lillian_117354_1_fa5a36f3-94e0-4bb9-b399-bbfaf15d6bed.jpg?v=1787092944"},{"product_id":"walrus-audio-2-channel-remote-switch","title":"Walrus Audio 2-Channel Remote Switch","description":"\u003cp\u003eUse the \u003cstrong\u003eWalrus Audio 2-Channel Remote Switch\u003c\/strong\u003e to control the Descent and Vanguard's two footswitches. This feature allows you to place the Descent at the back of your pedal board and run the small remote control switch to the front of your board; freeing up real estate on your board’s front row. To use the Remote option with this 2-channel remote switch, a TRS cable is required.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFor the Descent and Vanguard this pedal remotely controls the Preset footswitch and the Bypass foot switch.\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003ePreset Footswitch –Changes between presets\u003c\/li\u003e\r\n\u003cli\u003eBypass Footswitch \/ Preset Save – Push down Bypass to turn the pedal on and off, to save a setting and add the setting to your bank of presets, hold the Bypass footswitch down until the ‘Preset’ LED flashes\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003cp\u003eThe die cast enclosure’s exact size is 4.31\" x 2.25\" x 1.18\".\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450408366183,"sku":"117355","price":59.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-2-channel-remote-switch_117355_1_d6a6be92-7f57-4919-accf-f32bf920791b.jpg?v=1787092944"},{"product_id":"walrus-audio-deep-six-v3-compressor","title":"edlWalrus Audio Deep Six V3 Compressor","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Deep Six V3 Compressor\u003c\/strong\u003e is a true bypass studio-grade compressor in stomp box form, inspired by the performance of the Universal Audio 1176 with the simplicity of the Ross and Dynacomp. Offering a Level, Sustain, Attack, and Blend control, the Deep Six will give you unmatched versatility at a price you can afford. Polarity will never be an issue as the Deep Six comes standard with a polarity correction circuit. The internal voltage is doubled to 18 volts giving you the maximum amount of headroom for your sound while maintaining a typical current draw of 8.9 mA. The Deep Six also offers a Blend and Attack control which allows you to use the pedal with active pickups or humbuckers. The blend feature allows you to use high output instruments while truly being able to dial out any distortion that may be present.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eNew in V3:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eAdded Tone knob (bass cut) for the ability to shape the low end of your guitar signal\u003c\/li\u003e\r\n\u003cli\u003eSoft switch\/relay bypassing for smoother more reliable operation\u003c\/li\u003e\r\n\u003cli\u003eMoved to top mounted in\/out jacks\u003c\/li\u003e\r\n\u003cli\u003eUpdated art by Adam Forster that gives a humble nod to the original art that started it all\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e9 V DC 8.9 mA\u003c\/li\u003e\r\n\u003cli\u003eDimensions: 4.77 x 2.9 x 2.3 inches\u003c\/li\u003e\r\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals, daisy chain power supplies are not recommended\u003c\/li\u003e\r\n\u003cli\u003ePower supply not included\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450408398951,"sku":"117356","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-deep-six-v3_117356_1_ca93fe89-67f6-43db-ae8f-6ca68fb6a070.jpg?v=1787092944"},{"product_id":"walrus-audio-slo-multi-texture-reverb","title":"Walrus Audio Slo Multi Texture Reverb","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Slo Multi Texture Reverb\u003c\/strong\u003e allows players to create lush, modulated, sleepy and ambient soundscapes. Stocked with three different algorithms specifically designed to invoke textures for bringing dreams from your subconscious to reality.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe toggle switch allows three different reverb modes, Dark (Lower Octave), Rise (Ambient Swell) and Dream (Latching Pad), while secondary functions on the switch change between different wave shapes for the modulation on the reverb trail.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCombine deep modulation with long washy trails and experience, the Slö.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eALGORITHMS:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eDARK – Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.\u003c\/li\u003e\r\n\u003cli\u003eRISE – This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.\u003c\/li\u003e\r\n\u003cli\u003eDREAM – Here is a lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and pad will decrescendo according to where decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003cp\u003eThe Slö also features 3 different wave shapes accessible by holding down bypass while switching the algorithm toggle.\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eSINE – Smooth and even pitch up and down modulation\u003c\/li\u003e\r\n\u003cli\u003eWARP – Asymmetric pitch up modulation similar to a warped\u003c\/li\u003e\r\n\u003cli\u003erecord\u003c\/li\u003e\r\n\u003cli\u003eSINK – Asymmetric pitch down modulation for sinking detune similar to a Bigsby\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eMOMENTARY FUNCTIONS:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eBypass: When the switch is in off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.\u003c\/li\u003e\r\n\u003cli\u003eSustain: When pressed, the decay switch ramps up the reverb trail to maximum creating long dreamy reverb trail and then ramps back down to the decay knob setting when released. In the “Dream” algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eTRAILS MODE\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Slö can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Slö comes in a Lollipop Blue finish with light blue and off white ink featuring original artwork by Christi Du Toit.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe diecast enclosure’s exact size is 4.77\" x 2.6\" x 1.39\". Power requirements are 9VDC (100 mA minimum).\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450426617959,"sku":"118957","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-slo_118957_1.jpg?v=1787093017"},{"product_id":"walrus-audio-kangra-filter-fuzz","title":"Walrus Audio Kangra Filter Fuzz Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Kangra Filter Fuzz\u003c\/strong\u003e is a true bypass, two-in-one pedal that provides a thick and spatty octave fuzz, and a psychedelic filter thats great for sweeps, frequency boost or even envelope filter sounds. The filter can run independently, or with the fuzz feeding into it. This is no rhythm player’s fuzz. Dig in and play dirty with aggressive fuzz lead lines that’ll rip time and space apart at the seams.\u003c\/p\u003e\r\n\r\n\u003cp\u003eSNL Guitarist and fuzz fanatic, Jared Scharff, approached Walrus about doing a modern filtered and fuzz inspired by his favorite vintage fuzz pedal, the Kay Fuzz Tone. Working together through hundreds of texts, calls, emails and mailing prototypes back and forth, the Kangra came to life with plenty of grit, teeth and vintage vibe, as well as pronounced modern features.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eFUZZ\u003c\/h3\u003e\r\n\r\n\u003cp\u003eGet two different styles of fuzz with the M\/V Switch. In the modern position (M), you notice a more forgiving fuzz with longer and tighter sustain, while the Vintage position (V) feels starved with spatty breakup and grittier, shorter sustain.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eFILTER\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Kangra also has a versatile filter with Resonance, Sensitivity, Frequency and Envelope Filter controls. Use the filter on its own to add a unique shape to your sound, or flip the Envelope Filter switch and open up funky sixties style tones.\u003c\/p\u003e\r\n\r\n\u003cp\u003e“On the filter, I wanted to go for that vintage mpc 3000 low pass type of thing…Or similar to doing a low pass plug-in for a track, or like a DJ would do without it being too 'wah pedal' like, and this achieved that.” - Jared Scharff\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe art was inspired by a once in a lifetime expedition Jared took to the Kangra Valley near the Himalaya Mountains. It was there his journey inspired new ideas that can only be approximated by the Kangra Filter Fuzz. The pedal comes in a peach enclosure with art by Adam Forster in white and blue inks.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe diecast enclosure’s exact size is 4.77\" x 2.6\" x 1.39\". Power requirements are 9VDC, Center Negative, (100 mA minimum).\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450457059431,"sku":"122770","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-kangra_122770_1_56a675a3-6b3d-416a-9a7b-ecb7219fdfa8.jpg?v=1787093136"},{"product_id":"walrus-audio-mako-series-d1-high-fidelity-stereo-delay","title":"Walrus Audio MAKO Series: D1 High-Fidelity Stereo Delay Pedal","description":"\u003cp\u003eThe first in the Mako series, the \u003cstrong\u003eWalrus Audio Mako Series D1 High-Fidelity Stereo Delay\u003c\/strong\u003e is a powerful multi-function delay with five, studio grade, high-fidelity, custom tuned programs. The programs are Digital, Mod, Vintage, Dual and Reverse. Each can be tuned and tweaked with modulation, tone, age, and subdivisions. The attack knob adds another dynamic to each program, opening up a new world for creating soundscapes. The D1 boasts stereo in and out, midi control and on-board presets. A workhorse of a delay that is just as ready for the road as it is the studio.\u003c\/p\u003e\r\n\r\n\u003cp\u003eEach program can be fully customized to your taste and playing style with the Tweak knob. Flip the toggle switch to Mod to bring in a tasteful modulation to your delay trails. Tone will brighten or darken your delay trails. Age will add some grit and wear reminiscent of vintage delay units. Subdivisions can be easily changed between quarter, eighth and dotted eighth.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Attack knob will soften the attack of the echoes. Dreamy and ethereal soundscapes can be created with higher repeat and attack settings.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003ePrograms\u003c\/h3\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eDIGITAL\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Digital delay program offers a clean and crystal-clear delay that is perfect for rhythmic guitar parts where ultra-defined echoes are desired.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMOD\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Mod delay program has unique modulation LFOs applied to the repeats that are random and run at multiple rates to create unpredictable pitch modulation. This results in very unique sounding repeats perfect for warping minds and scattering trains of thought.\r\nVintage – The Vintage program allows for analog delay inspired tones to be achieved with complex filtering applied to the repeats. Use the tone knob at low settings for darker filtering and at higher settings to roll off low end.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eDUAL\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Dual program employs two delays in parallel, each with different time divisions. When connected in mono, the two delays are added together. When connected in stereo, one set of repeats is sent to the left output and one set is sent to the right. The division switch has unique functionality in Dual mode. We’ll break it down for you below:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eIn the quarter note position, the D1 offers 1\/4 note and 1\/4 triplet repeats\\\u003c\/li\u003e\r\n\u003cli\u003eIn the eighth note position, the D1 offers 1\/8 note and 1\/4 triplet repeats\u003c\/li\u003e\r\n\u003cli\u003eIn the dotted eighth note position, the D1 offers 1\/4 note and .1\/8 repeats\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eREVERSE\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Reverse program reads the delay memory backwards creating a unique delay repeat character known as reverse delay.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003ePresets\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe D1 is capable of saving up to nine on-board presets and up to 128 are accessible via midi. Onboard presets are accessible with the bank switch. Cycle between presets in each bank by pressing bypass and tap at the same time. You will see the tap LED change from Red to Green to Blue. Any adjustments made in a preset will change the tap LED to purple to show that you have edited the preset. Refer to the manual for accessing and saving presets via midi.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_2\"\u003eBypass and Tempo Modes\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe D1 has three different bypass modes. True bypass, DSP+True Bypass (trails), and DSP Bypass. The D1 offers global and preset tempo modes. Global mode keeps the tempo the same when changing presets. Preset tempo will use the delay time that was stored when the preset was saved. Refer to the manual for more info on switching modes.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_3\"\u003eMomentary Functions\u003c\/h3\u003e\r\n\r\n\u003cp\u003ePress and hold the bypass switch to ramp up the repeats of the delay. Release to set the feedback back to the knob location.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe D1 comes in an anodized silver finish with black, dark green, red, orange and purple ink. \u003c\/p\u003e\r\n\r\n\u003cp\u003eThe enclosure’s exact size with knobs is 4.9” x 2.52” x 2.64”. Power requirements are 9VDC (300mA minimum).\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450525642855,"sku":"131986","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-mako-d1_131986_1_89eb4908-77dc-48aa-86f0-9a35a77b2fb7.jpg?v=1787093417"},{"product_id":"walrus-audio-julia-chorus-vibrato-v2","title":"Walrus Audio Julia V2 Chorus\/Vibrato Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Julia Chorus\/Vibrato V2\u003c\/strong\u003e is a fully analog, feature-rich chorus\/vibrato packed with a wide array of tonal landscapes begging to be explored. Updated for 2020, Julia now has top mounted jacks, soft switch bypassing and updated art from Adam Forster. \u003c\/p\u003e\r\n\r\n\u003cp\u003eJulia is able to produce mild smooth chorus, to seasick vibrato and everywhere in between. With controls like Lag, Dry-Chorus-Vibrato Blend, and selectable analog LFO wave shapes, you are able to dial in all types of classic and unique chorus\/vibrato sounds; some settings giving a familiar feel while others are not found on traditional chorus pedals.\u003c\/p\u003e\r\n\r\n\u003cp\u003eA special feature of the Julia is the Lag control. The Lag knob lets you set the center delay time that the LFO effect modulates from. From smooth and tight modulation at lower settings, to warbling detune at maximum, the Lag knob adds a new dimension to the traditional Chorus\/Vibrato landscape. \u003c\/p\u003e\r\n\r\n\u003cp\u003eWhile most chorus\/vibrato pedals offer a toggle to go between the two effects, Walrus have provided a knob to blend between Dry, Chorus, into Vibrato (labeled d-c-v on the pedal). The Dry-Chorus-Vibrato Blend changes the ratio of dry to wet signal sent to the output. At minimum, you will hear no effect. Set it to noon for equal parts dry and wet – the traditional chorus setting. Set it to maximum for 100% wet – the traditional vibrato setting. Explore the ground between minimum and noon for adding slight amounts of movement to your dry signal (also making the Julia great on bass guitar). Explore the ground between noon and maximum for all sorts of unheard chorus\/vibrato combinations.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Julia comes in a deep lavender colored enclosure with surf green ink, featuring original artwork of the water mystery, Julia revealing the tip of her hand telling more of her true story by Adam Forster.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450525708391,"sku":"131985","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-julia-v2_131985_1_1_41bbd02f-28fa-413e-aae0-a1b46627c4f1.jpg?v=1787093417"},{"product_id":"walrus-audio-ages-five-state-overdrive-pedal","title":"Walrus Audio Ages Five-State Overdrive Pedal","description":"\u003cp\u003eFor ages, overdrive has been the one effect vital for so many. It’s used to charge through front lines of the mix and deliver a clear message that won’t soon be forgotten to its loyal listeners. The \u003cstrong\u003eWalrus Audio Ages\u003c\/strong\u003e is a massively versatile overdrive machine standing at the ready for any amp and pickup combination that is thrown at it. An overdrive with innovative features that can stand on its own and stack well with other drives, Ages is ready to stand its ground and convey an unforgettable sound.\u003c\/p\u003e\n\n\u003cp\u003eThe five-position rotary knob offers the following gain states:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eI.    Low-gain mode with symmetric silicon soft clipping. Compressed and smooth\u003c\/li\u003e\n\u003cli\u003eII.   Low-gain mode with symmetric LED soft clipping. Pushed, open, and sparkly.\u003c\/li\u003e\n\u003cli\u003eIII.  High-gain mode with symmetric silicon soft clipping. Increased saturation and tight\u003c\/li\u003e\n\u003cli\u003eIV.  High-gain mode with symmetric LED soft clipping. Saturated, punchy and big\u003c\/li\u003e\n\u003cli\u003eV.   High-gain mode with symmetric silicon hard clipping. Heavy compression, thick and chewy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThink of each position as a different “flavor” of the pedal. Fine-tune each of these gain states with the dry knob for a near infinite supply of gain options. \u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450582560871,"sku":"139254","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-ages_139254_1_7b834941-2772-4e2d-afe5-26041ab1d41a.jpg?v=1787093634"},{"product_id":"walrus-audio-aetos-120v-clean-power-supply-demo-deal","title":"Walrus Audio Aetos 120V Clean Power Supply (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eWalrus Audio Aetos\u003c\/strong\u003e is an 8-output, isolated power supply, utilizing an internal custom wound toroidal transformer to provide the highest noise filtering and cleanest power, giving artists the purest sound in their signal chain. The Aetos is housed in a solid die cast enclosure and is 4.7”long x 3.7” wide x 2” height and has 8 total 9VDC outputs, 6 are 100mA and 2 outputs are high current outputs (300mA) for higher current drawing pedals like line 6 DL series modelers, the Boss Twin Series Pedals and many digital modulation pedals on the market. It comes with a detachable 230V AC Power cord. This unit comes with 8 – 2.1mm barrel black power cables and 2 black-to-red (Line 6) power cables. Fits under most pedal boards including Pedaltrain (PT JR and up), Pedal Pad, Blackbird Boards, Creation Music Company, and Holeyboards.\u003c\/p\u003e  \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDimensions: 4.7”long x 3.7” wide x 2” height\u003c\/li\u003e \u003cli\u003eWeight: 3 lbs.\u003c\/li\u003e \u003cli\u003eInput: 120VAC\u003c\/li\u003e \u003cli\u003eOutput: 6 outputs – 9VDC (100mA), 2 outputs – 9VDC (250mA)\u003c\/li\u003e \u003cli\u003eFully Isolated DC Power: Toroidal transformer based supply\u003c\/li\u003e \u003cli\u003eItems Included: 5 ft 120VAC detachable power cord, 8 – 2.1mm black power cables, 2 – 2.5mm to 2.1mm (red to black) line 6 cables\u003c\/li\u003e \u003cli\u003e5 year warranty\u003c\/li\u003e \u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450585641063,"sku":"139161","price":152.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-audio-aetos-120v_56468_1_1_dc19daee-6be5-4ef3-bf95-98e72bd6ccc8.jpg?v=1787093647"},{"product_id":"walrus-eb-10-preamp-eq-boost-cream","title":"Walrus EB-10 Preamp\/EQ\/Boost Pedal - Cream","description":"\u003cp\u003eA tone tweakers delight, the \u003cstrong\u003eWalrus EB-10\u003c\/strong\u003e works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12 dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10 dB MOSFET boost for some great extra punch.\u003c\/p\u003e\r\n\u003cp\u003eUse the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn't know your guitar or bass even had.\u003c\/p\u003e\r\n\u003cp\u003eThe EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to the current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch. The pedal will boot up in the last known operating mode and if that is preset mode, it loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.\u003c\/p\u003e\r\n\u003cp\u003eA portion of proceeds from each pedal sold will be donated to \u003ca href=\"www.raicestexas.org\" target=\"_blank\" rel=\"noopener\"\u003eRAICES\u003c\/a\u003e.\u003c\/p\u003e\r\n\u003cp\u003ePower requirements are 9VDC, center negative (100mA minimum). The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450589474919,"sku":"140450","price":229.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-eb-10-cream_140450_1_823df2d7-131a-4c5d-8087-6505b27c64fb.jpg?v=1787093664"},{"product_id":"walrus-eb-10-preamp-eq-boost-black","title":"Walrus EB-10 Preamp\/EQ\/Boost Pedal - Black","description":"\u003cp\u003eA tone tweakers delight, the \u003cstrong\u003eWalrus EB-10\u003c\/strong\u003e works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12 dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10 dB MOSFET boost for some great extra punch.\u003c\/p\u003e\r\n\u003cp\u003eUse the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn't know your guitar or bass even had.\u003c\/p\u003e\r\n\u003cp\u003eThe EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to the current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch. The pedal will boot up in the last known operating mode and if that is preset mode, it loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.\u003c\/p\u003e\r\n\u003cp\u003eA portion of proceeds from each pedal sold will be donated to \u003ca href=\"www.raicestexas.org\" target=\"_blank\" rel=\"noopener\"\u003eRAICES\u003c\/a\u003e.\u003c\/p\u003e\r\n\u003cp\u003ePower requirements are 9VDC, center negative (100mA minimum). The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450589507687,"sku":"140449","price":229.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-eb-10_140449_1_8ff8cb61-5278-4880-b8c4-c013f4e6aec1.jpg?v=1787093664"},{"product_id":"walrus-audio-julianna-stereo-analog-chorus-vibrato","title":"Walrus Audio Julianna  Deluxe Stereo Analog Chorus\/Vibrato Pedal","description":"\u003cp\u003eBuilding off of the lush, tonal landscapes that the Julia Analog Chorus\/Vibrato created, Julianna is an all analog, digital LFO, stereo chorus\/vibrato with new expanded features. The \u003cstrong\u003eWalrus Audio Julianna\u003c\/strong\u003e is able to produce mild smooth chorus, to seasick vibrato, to everywhere in between. Familiar controls like Lag, Dry-Chorus-Vibrato Blend, and selectable LFO wave shapes are all still here, but Julianna employs some new tricks: The Secondary LFO speed, modulation drift, tap\/expression control and momentary features will have you commanding all new kinds of sounds not found in traditional chorus pedals.\u003c\/p\u003e\r\n\u003cp\u003eThe Julianna contains all of the sounds and controls that the Julia has but adds these deluxe features:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTap Tempo Control: Set the rate of the LFO with the Rate knob or the tap tempo switch\u003c\/li\u003e\r\n\u003cli\u003eStereo In\/Out Jacks: Run mono in\/mono out, mono in\/stereo out, stereo in\/stereo out\u003c\/li\u003e\r\n\u003cli\u003eMomentary Secondary LFO Speed: Ramp up or slow down to a second LFO rate. See manual for details\u003c\/li\u003e\r\n\u003cli\u003eDrift Function: Gently speed up and slow down the LFO rate, kinda like having a little robot inside your pedal moving the Rate knob up and down\u003c\/li\u003e\r\n\u003cli\u003eRandom LFO Shape: In addition to sine and triangle, Julianna adds a random wave shape option to modulate the pitch of your signal\u003c\/li\u003e\r\n\u003cli\u003eTap Division: Select quarter note, quarter note triplet or eighth note multiplier to scale a tapped in tempo\u003c\/li\u003e\r\n\u003cli\u003eExpression Control: Control Depth, Rate or both with an expression pedal\u003c\/li\u003e\r\n\u003cli\u003eExternal Tap In\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eUnlike most other chorus pedals, the Julianna and Julia have a special feature called Lag control. The Lag knob lets you set the center delay time that the LFO modulates. From smooth and tight modulation at lower settings, to a warbling detune at maximum, the Lag knob adds a new dimension to the traditional chorus\/vibrato landscape.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eD-C-V KNOB\u003c\/h3\u003e\r\n\u003cp\u003eThe DCV knob sets the ratio of dry to wet signal through the mono channel of the Julianna. Traditional mono chorus sounds can be heard with the knob set around noon. Pitch vibrato is found in the full clockwise position. The ground in between offers unique blends of chorus and vibrato not commonly found on other chorus pedals.\u003c\/p\u003e\r\n\u003cp\u003eWhen both outputs are connected, set the DCV knob to full counterclockwise to send your dry signal to the mono output and vibrato signal to the stereo output for a traditional stereo chorus sound. Explore other variations by turning the DCV knob up slightly to add some vibrato signal to the dry output changing the stereo image.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450604843111,"sku":"141982","price":209.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-julianna_141982_1_12361a80-f95b-45a2-bc74-7d9d1d35b549.jpg?v=1787093726"}],"url":"https:\/\/vintageking.mom\/collections\/walrus-audio.oembed","provider":"Vintage King","version":"1.0","type":"link"}